HBE-HT is a state-of-the-art surface coating designed to solve specific industry problems by combining the unique features of epoxy and proprietary cure technologies. HBE-HT is a 100% solids, two-component epoxy coating system which has been specifically designed as a protective coating for pipelines operating at elevated temperatures. This coating is available in brush and spray grade formats.

Typical Uses: Protective coating for pipelines in buried or immersed applications. Used as a direct­to-metal corrosion resistant coating and as a rehab coating on steel pipelines and at girth welds. Also used as touchup material for mainline coatings. Excellent coating for pipeline valves, fittings, and bends.

High Build in a single coat

Sets and Cures over a broad temperature range

Environmentally safe

100% solids, Zero V.O.C.

Excellent adhesion to grit blasted steel - an ideal mainline corrosion coating for pipelines

Superior adhesion to Fusion Bonded Epoxy (FBE) Coatings - ideal coating for joint protection and repair of FBE coated pipe.

Outstanding resistance to cathodic disbonding up to 120°C (248°F) operating temperatures

Easily applied with brush, roller or a heated, airless spray system

Key Technical Data

Coating Description: Phenolic Epoxy

Conversion to Solids: 100%

Theoretical Coverage:
425 mil-sq.ft. / liter
1605 mil-sq.ft. / US gallon
1.0 mm-m2 / liter

Typical Thickness: > 20 mils (500 microns)

Flashpoint (T.C.C.): >120°C (250°F)

Mixing Ratio: 3 parts base, 1 part cure by volume

Safety: MSDS HBE HT Base, MSDS HBE HT Cure