2010/12/10 10:48:38 阅读:436次
Product Description
HBE-HT is a state-of-the-art surface coating designed to solve specific industry problems by combining the unique features of epoxy and proprietary cure technologies. HBE-HT is a 100% solids, two-component epoxy coating system which has been specifically designed as a protective coating for pipelines operating at elevated temperatures. This coating is available in brush and spray grade formats.
Typical Uses: Protective coating for pipelines in buried or immersed applications. Used as a directto-metal corrosion resistant coating and as a rehab coating on steel pipelines and at girth welds. Also used as touchup material for mainline coatings. Excellent coating for pipeline valves, fittings, and bends.
Features & Benefits
High Build in a single coat
Sets and Cures over a broad temperature range
Environmentally safe
100% solids, Zero V.O.C.
Excellent adhesion to grit blasted steel - an ideal mainline corrosion coating for pipelines
Superior adhesion to Fusion Bonded Epoxy (FBE) Coatings - ideal coating for joint protection and repair of FBE coated pipe.
Excellent chemical resistance
Outstanding resistance to cathodic disbonding up to 120°C (248°F) operating temperatures
Easily applied with brush, roller or a heated, airless spray system
Key Technical Data
Coating Description: Phenolic Epoxy
Conversion to Solids: 100%
Theoretical Coverage:
425 mil-sq.ft. / liter 1605 mil-sq.ft. / US gallon 1.0 mm-m2 / liter Typical Thickness: > 20 mils (500 microns)
Flashpoint (T.C.C.): >120°C (250°F)
Mixing Ratio: 3 parts base, 1 part cure by volume
Safety: MSDS HBE HT Base, MSDS HBE HT Cure
|
产品编号 | 产品名称 | 产品简介 | 产品价格 |
---|---|---|---|
MS-00550-00 | HBE-HT高防腐涂层 | 0¥ |