2010/11/10 11:01:11 阅读:562次
Description
Tapecoat TC Wet Bond Flexible Epoxy Mastic® is a corrosion preventive epoxy coating for metal and concrete surfaces above and below the water line. This protective epoxy is also suitable for wet surfaces above and below ground and for underwater applications in fresh water environments.
TC Wet Bond Flexible Epoxy Mastic can be used to repair pipeline coatings, for coating irregular fittings and surfaces, and to perform general maintenance coatings repair in regulator vaults. It is ideal for the repair of damaged plant-applied coatings including coal-tar enamel.
Specifications
Composition
TC Wet Bond Flexible Epoxy Mastic is a unique modified amine cured epoxy coating with a 100% solids content.
Surface Preparation
ecificationspes.
Remove all contaminants that would impede bond. Use effective cleaning procedures to remove: rust, dirt, oil and grease. This may include the use of high-pressure fresh water cleaning, using suitable solvents or detergents to SSPC-SP 1 or abrasive blast to SSPC-SP 6. Application
Environment: Use only where application and curing can proceed at temperatures above 40°F (4°C). The temperature of the surface and that of the coating itself must also be within these limits. Apply only on a clean surface. (See detailed Field Specifications for complete instructions.)
Mixing: Pour entire contents of hardener container into the resin container and mix thoroughly until homogeneously mixed, approx. 3-5 minutes.
Application Method: Apply epoxy by brush or pad.
|
产品编号 | 产品名称 | 产品简介 | 产品价格 |
---|---|---|---|
MS-00425-00 | Tapecoat柔性环氧树脂胶泥 | 0¥ |