
New digital ultrasonic flaw detector, created for replacement of out-of-date analog devices UD2-12.

Universal low-frequency (from 20 kHz to 2,5MHz) flaw detector is intended for detection defects (discontinuity and uniformity of materials) in half-finished products and finished articles

Precision, not having analogues of Russia, universal ultrasonic thickness gauge with high reliability of the testing.

New eddy-current flaw detector with rich functionalities for the decision of all circle of problems of the testing of ferromagnetic and non ferromagnetic materials a method of vortical currents.

CDX-1多功能磁粉探伤仪
用于检验由铁磁材料制成的零件,不论其几何形状繁简,均可用磁粉法探伤。可以发现零件表面因锻压、淬火、研磨、疲劳等原因形成的裂纹以及夹渣等极细微的缺陷。

CDX-2多功能磁粉探伤仪
用于检验由铁磁材料制成的零件,不论其几何形状繁简,均可用磁粉法探伤。可以发现零件表面因锻压、淬火、研磨、疲劳等原因形成的裂纹以及夹渣等极细微的缺陷。

CDX-3多功能磁粉探伤仪
用于检验由铁磁材料制成的零件,不论其几何形状繁简,均可用磁粉法探伤。可以发现零件表面因锻压、淬火、研磨、疲劳等原因形成的裂纹以及夹渣等极细微的缺陷。

CDX-4多功能磁粉探伤仪
用于检验由铁磁材料制成的零件,不论其几何形状繁简,均可用磁粉法探伤。可以发现零件表面因锻压、淬火、研磨、疲劳等原因形成的裂纹以及夹渣等极细微的缺陷。

CDX-6多功能磁粉探伤仪
用于检验由铁磁材料制成的零件,不论其几何形状繁简,均可用磁粉法探伤。可以发现零件表面因锻压、淬火、研磨、疲劳等原因形成的裂纹以及夹渣等极细微的缺陷。

CJX-A型角焊缝探伤仪
可对较粗糙面和不去除表面涂复层的工件进行交流或直流探伤,探头上加装可调活动关节。本仪器特别适用于平焊缝、角焊缝、船体、压力容器、管道的磁粉探