Trenton-6填充料

Non-Melting

Heavier than water

Anti-Corrosiv

Water Resistant

Dielectric

Inert

Non-Toxic

Non-Flammable

Pliable

Fill-Coat #6 Pipeline Casing Filler is a cold-installed/high temperature petroleum based casing filler compound that can be installed at ambient temperature as low as 50°F (10°C) with portable pumps. The product is used in bridge abutment casings, and it can be used in casings with elevated temperatures.

Fill-Coat #6 is used to fill the annulus of gas distribution bridge abutment casings. It prevents corrosion by filling the void in the casing annulus. In addition, new water is prevented from entering the gas-filled casing. Applications include aboveground cased pipe (like bridge abutment casings).

Application Procedure

Fill-Coat #6 can be installed by a variety of portable air powered mastic pumps (1, 5, or 50 gallon capacity). The material is pumped into the annulus of the casing until the casing is full. The casing ends can be sealed with Trenton Fill-Putty, Trenton #2 Wax-Tape or an epoxy filler once it is full.

Flash Point Specific Gravity Temperature Range Color Consistency Dielectric Strength Density

ASTM D 92 greater than 300°F 1.02 to 1.08 30°F to 225°F Dark brown Grease-like Greater than 100 Volts per mil ASTM D1475 7.898 lbs per gallon