Pipe Wrap, Joint Coatings & Accessory Products
Polyken carries a full line of products to complement the main line coating systems and meet the challenges of modern pipeline activities.
Utility work: hand-applied tape products for gas utility, oil field, and plumbing applications on small diameter pipe.
Coating repair: cold-applied tape products for plant and field repair of main line coating systems.
Specialty fittings and fabrication work: a variety of tape systems and mastics that conform to irregularly-shaped pipe.
Field joints: single-sided and double-sided tape systems that conform to bell and spigot, welded and mechanically-coupled field joints.
ROW construction: Rockshield system, tie-in, and above-ground tape systems for use at the job site by the pipeline contractor.
Offshore Tapes: Whether replacing PVC on welded joints or protecting Pier Pilings, Polyken® has the tape coating for the job.
|
Product |
Uses & General Characteristics |
Total
Thickness |
Adhesion
to Primed Steel Pipe |
Maximum
Temperature |
|
|
Solvent-based primer designed for brush, roller or spray application to mechanically cleaned pipe surfaces. Contains stress-corrosion cracking inhibitors. |
N/A |
N/A |
100°C
212°F |
|
910 |
All-purpose tape system for field application in the oil patch. |
0.25 mm
10 mil |
11 N/10 mm
100 oz/in |
66°C
150°F |
|
900 |
General utility tape for hand application on small diameter pipe, joints and fittings. |
0.30 mm
12 mil |
11 N/10 mm
100 oz/in |
66°C
150°F |
|
930(-35) |
Heavy duty joint wrap tape for hand wrapping in applications where higher shear properties are required. Designed without release liner for less waste and ease of use. |
0.89 mm
35 mil |
25 N/10 mm
225 oz/in |
66°C
150°F |
|
|
Cold-applied tape system with an elevated high-tack adhesive. Provides excellent conformability when hand applied to field joints, fittings and specialty piping. EN/DIN B30 Qualified. |
0.89 mm
35 mil |
28 N/10 mm
250 oz/in |
66°C
150°F |
|
|
1.27 mm
50 mil |
28 N/10 mm
250 oz/in |
66°C
150°F |
|
|
Cold-applied tape system with a high tack adhesive. Used as a patch/repair system and as the primary corrosion protection system on field joints, fittings and specialty piping. |
0.89 mm
35 mil |
28 N/10 mm
250 oz/in |
66°C
150°F |
|
|
1.27 mm
50 mil |
35 N/10 mm
320 oz/in |
66°C
150°F |
|
|
100% solids mastic designed as a self-adhering filler material prior to overcoating with Polyken joint coating tape systems. |
3.17 mm
125 mil |
33 N/10 mm
300 oz/in |
93°C
200°F |
|
954 |
Mechanical protection layer for use with all of the Polyken joint wrap coating products. Easy hand or (outerwrap) (outerwrap) machine application. |
0.38 mm
15 mil |
N/A (outerwrap) |
85°C
185°F |
泰亚赛福 —— 世界领先的检测仪器集成供应商 
您当前的位置：
加入对比
