HTG2数字式扭矩仪

HTG2 Digital Torque Gauge with programmable setpoints

HTG2 digital torque gauge offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.

Store up to 1,000 values in memory, which can be displayed or transmitted using serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.

HTG2 digital torque gauges are sold in kits which include the gauge, sensor, six foot cable, and AC adapter/charger. Built-in NI-MH rechargeable batteries. 

Model

Capacity

Resolution

HTG2-4

70.00 ozf-in
5.000 kg-cm
50.00 N-cm

0.01 oz-in
0.001 Kg-cm
0.01 N-cm

HTG2-15

15.00 lbf-in
20.00 Kg-cm
200.0 N-cm

0.01 lb-in
0.01 Kg-cm
0.1 N-cm

HTG2-40

40.00 lbf-in
50.00 Kg-cm
500.0 N-cm

0.01 lb-in
0.01 Kg-cm
0.1 N-cm

HTG2-85

85.00 lbf-in
100.0 Kg-cm
1000 N-cm

0.1 lb-in
0.1 Kg-cm
1 N-cm

 

 

 

 

Accuracy:

± 0.5 % Full scale ± 1 digit 

Sampling Rate

30 times/s 

Display:

4 digit, 14 mm high 

Overload capacity:

150 % Full scale (flashing LED beyond 108% full scale) open collector output signal 

Zero adjustment:

10% Full scale 

A/D converter:

16 bit 

Memory:

non-volatile, recall up to 960 loads, recall both peaks, open and close torque 

Setpoints:

Min, Max (programmable), with output signal 

Output signal:

RS232C (8,1,N,19200), analog ± 2V DC, Open collector 4x (+NG, Ok, -NG, OVL), max. 30V DC, 10mA, Mitutoyo Digimatic 

Temperature range:

5 - 45°C  

Air humidity:

85% RH, max. 

Power supply:

Rechargeable NiCd battery pack (approx. 8 hours continuous use) and/or 230 V AC adapter 

Housing dimensions: (approx.)

215 x 65 x 51 mm (L x W x H)
Sensor: 150x39mm (lxdiam.) 

Weight: (approx.)

Display unit: 440g / Sensor: 530 g
Complete set: 2000 g 

Warranty

2 Years