Product Name :

P04 

Nominal Tank Capacity :

28 Litres

Size selector :

«Smaller  Larger»4

Product Specification :

This Stirred Clifton water bath can be left running without supervision at a set temperature.

It can also be used to automatically increase the water temperature by a 'set value' after a 'timed period' and repeat this cycle until reaching end of its program.

Control

Example operation, set temperature is automatically increased by a programmed value e.g. +2°C after a timed interval e.g. 24 hours.

The temperature increase can be adjusted.

The time period is adjustable from 1 minute to 99 hours. For example a 24 hour 'time period' provides up to 16 days of operation.

Temperature control - accurately controlled and set values reproduce able every time using advanced PID control.

Temperature control features constant running "Adaptive tuning".

Features menu driven data entry.

Clearly visible LED display suiting all lighting conditions.

Digital LED display to 0.1°C resolution.

Temperature range ambient +5°C - 99°C [range extendable to -10°C with accessory cooling DC1-300 or -20°C with accessory cooling DC2-300].

Sensitivity ±0.1°C.

Uniformity ±0.01°C.

Actual water bath liquid temperature always displayed for complete assurance.

Settings retained in memory.

Clearly visible bright status indicators

Indication of heating, over temperature alarm, timer and setting set points.

Water bath

Designed for continual use, fitted with a constant level device, which automatically maintains a fixed level of liquid thereby eliminating the need to regularly top up the bath. Using standard laboratory tubing, connect to the bottom outlet of the constant level to a regulated water supply/tap, adjust the water supply to provide a drip/slow feed of water, maintaining temperature control and automatically maintaining safe water level. The side outlet acts as an overflow to a sink or drain.

We always recommend fitting a lid to reduce liquid losses and maintain the water level for longer periods of time.

Immersed components are corrosion resistant.

Supplied with removable stainless steel false base designed for good water circulation and water temperature stability.

Corrosion resistant stainless steel tank crevice free.

Safety

A safety cutout float switch - low liquid level protection.

Over temperature alarm automatically set at +4°C above set point, with heater cut off.

Under temperature alarm automatically set at -4°C below set point.

Construction

Stainless steel 304 spec bath contained within a sturdy body.

Body being durable construction with powder paint finish having good chemical and detergent resistance.

Now featuring an “Anti-bacterial paint finish” that inhibits the growth of bacteria - more details in "Features and Benefits" below.

Featuring easy to "wipe clean" control panel also featuring good chemical and detergent resistance.

 

Tank, immersed components :

Immersed components are corrosion resistant, water bath 304 spec (18/8) stainless steel crevice free.

Internal Dimensions :

395w x 298d x 200h mm [Notes area - below - information on liquid levels]

External Dimensions :

537w x 332d x 240h mm

Temperature Range :

Ambient +5°C - 99°C

Sensitivity/temperature stability @45°C :

±0.1°C

Uniformity @45°C :

±0.01°C

Temperature setting/control :

Splash proof controls/Keypad setting/Digital LED display/PID temperature control

Temperature display resolution :

Real time fast responding display of actual measured temperature in increments of 0.1°C.

Heat Up Times :

Heating/Cooling information :

1. All temperature measurements and performance claims have been carried out in ambient temperature at 20°C and installed correctly with adequate ventilation.

2. Above 60°C or below ambient it is recommended that to achieve optimum performance and reduce energy consumption the bath should be covered with a LD4-x Cover or layer of polypropylene spheres - see accessories.

3. "Adaptive tune" provides instant control from start up and automatically adjusts PID values with actual temperature readings being fed into its brain until it achieves set temperature. These adjusting PID values determine heat-up rate, the load and volume of liquid producing negligible overshoot. All this happens automatically and requires no setting giving you peace of mind.

Warranty Period :

3 Years

Safety features :

1. In use a Safety cut-out Float switch monitors the water level in the bath and when it drops below a safe working amount the heater switches off. When this happens a red warning alarm indication illuminates on the controls.

2. For peace of mind protecting your work there is auto setting of the Over and Under Temperature alarms, operating at +4°C and -4°C about set point temperature with heater cut off, indication.

3. Bath is fitted with non-slip rubber feet for safety.

Safety Class :

1

Heater Power (W) @ 220-240V :

1250W

Power consumption (W) @ 220-240V:

1300W

Voltage :

230V

Drain tap fitted :

No

Packed Weight :

14.7 kg

Packed Dimensions :

620 x 410 x 370mm

Notes :

Liquid level in water bath - information.

·  Minimum liquid level - 165mm.

·  Maximum liquid level - 175mm.

'Working' Liquid level, with false base/shelf in bottom water bath - information.

·  Minimum liquid level - 130mm above the top of the false base/shelf.

·  Maximum liquid level - 150mm above the top of the false base/shelf.

·  For shallow liquid levels refer to accessories below - RS4 Raised shelves.

Accessory - information.

·  Details below for options and recommendations.

·  For operation at temperatures below ambient to -20°C accessory Immersion Cooler DC1-300 or DC2-300 is necessary - accessories below.

·  Above 60°C or below room temperatures it is recommended that to achieve optimum performance the bath should be covered with Lid or polypropylene spheres - accessories below.

Features and Benefits :

1. Stirred Clifton water bath designed for immersion of flasks/bottles/racks in a highly stable temperature environment throughout the water bath.

2. Operates in temperature range ambient +5° to 99°C where majority of standard laboratory work is undertaken. For temperatures below ambient an Immersion Dip Cooler DC1-300 or DC2-300 can be used - refer to accessories.

3. Easy to read bold temperature display to 0.1°C resolution with quick and reliable selection and attainment of desired temperature using PID control with Smart technology constantly tuning the Thermostirrer to the bath liquid and its load. The bold temperature display can be easily seen at a distance.

4. Clifton Stirred baths are designed for good water movement and water temperature stability throughput the bath and provides good working area. Fitted with a removable sturdy stainless steel false base/shelf for supporting flasks/bottles/racks.

5. Safety features include a visual indication and heater cut off when working conditions in the water bath exceed the auto setting under and over temperature alarm values. In low liquid situations a Safety cut-out Float activates, switching off the heater.

6. Quiet running stirrer motor operating at optimum speed for maximum water movement in bath.

7. Thermostirrer features sturdy stainless steel casing with a powder coated top, all surfaces providing a durable and chemical resistant construction, all intended for a long working life.

8. Water bath is fitted with a 304 spec stainless steel tank being easy to clean tank and crevice free with a powder coated exterior and fitted with non-slip rubber feet for safety.

9. Very reliable built to latest safety standards and supplied with comprehensive operating instructions and product support along with Three-year warranty.

10. Broad range of accessories available to suit wide range of applications - accessories below.

11. Before leaving the factory each water bath undergoes following:

·  Uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data.

·  Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

·  To verify the performance of the temperature control system every one undergo a factory 2 point calibration procedure which calculates the temperature values over the operating range.

12. Powder painted body providing a durable finish and protection against corrosion and now featuring “active anti-bacterial technology”. This paint finish actively inhibits bacterial growth improving hygiene requirements as demanded by many clinical and laboratory environments. Hygienic coatings are part of a controlled approach to cleaner facilities. The Clifton range has always featured easy to wipe clean smooth paint finishes that are resistant to routine and efficient disinfection’s, however this improved coating featuring ‘active anti-bacterial’ properties provides an extra layer of defence. This new anti-bacterial paint finish is effective against major strains of bacterium including E-coli and Staphylococcus aureus, resistant strain. Within its formulation an active ingredient is a proven anti-bacterial agent bound into the coating during application and curing to the product. The efficacy of the paint finish applied to the Clifton range is maintained over time, as the anti-bacterial agent is integral within the paint finish.