Product Name :

NE 010G/I 

Product Description :

Interlock Centrifuge 

Size selector :

«Smaller  Larger»3

Product Specification :

This interlocked Centrifuge is constructed with a steel body with fourplace swing out rotor complete with removable aluminum buckets. The safety interlock, prevents the lid being opened until the rotor is at rest.

Safety Features

In the case of power failure the lid remains in the locked position.

The product can only be operated if the lid is correctly closed and locked in position.

Control panel has a series of indicator lamps - for rotor on, lid locked and rotor run down

Viewing window in lid for observing rotor.

Operating Features

Maintaining finger pressure on the push button operates the centrifuge and locks the lid in position

Releasing finger pressure de-energies the rotor, but the lid remains locked until the rotor is at rest.

Operation making it suitable for quick spins.

Supplied Rotor Features

Four place swing out rotor

Four buckets fitted on Rotor suitable for tubes up to maximum of 17mm dimeter.

For added flexibility the Rotor comes with two sets of adaptors, a green set suitable for 13mm tubes and grey set for 10mm tubes.

Centrifuge Features

Fixed speed, maximum 2800rpm

Maximum radius 135mm

Maximum RCF 1200g.  

External Dimensions :

361w x 400d x 320hmm( Lid closed). 361w x 415d x 720hmm (Lid open).

Warranty Period :

3 Years

Safety features :

1. Motor fitted with one shot overtemperature/overcurrent safety device.

2. Maintaining finger pressure on the push button operates the centrifuge and locks the lid in position.

3. Releasing finger pressure de-energises the rotor, but the lid remains locked until the rotor is at rest.

4. Indicators for rotor on, lid locked and rotor running down.

5. Viewing window in lid for observing rotor.

6. Preventing debris leaving the Rotor area, a rubber seal provides a barrier when the lid is locked in position.

Safety Class :

1

Voltage :

230V or 120V models available

Packed Weight :

11.8 kg

Packed Dimensions :

450 x 410 x 320mm

Notes :

1. With the swing out rotor supplied with Centrifuge, four bucket holders, 17mm internal diameter, recommended Centrifuge tubes: Pyrex 1660/02M 16mm x 90mm - glass; Nalgene 3110-0120 16mm x 101mm - polypropylene; Fisher TES-600-029R 10mm x 75mm - glass and Fisher TES-600-071S 16mm x 100mm - these are medium walled, borosilicate glass Test tubes.

2. Where Vacutainer tubes are used and rumbling is reported when the rotor is running at maximum speed this is because the tubes exceed their "use by date".

Features and Benefits :

1. Spillages are contained within a gulley in the centrifuge bowl where the Rotor is spinning to contain spills.

2. To assist cleaning the Rotor buckets are easily removed from the rotor by lifting clear, allowing easy access and cleaning in working area of the Centrifuge.

3. Removable buckets allows easy cleaning or to be autoclaved.

4. Preventing debris leaving the Rotor area, a rubber seal provides a barrier when the lid is locked in position. The stainless steel inner lid which seals the Rotor bowl, provides an easy wipe clean surface.

5. Fitted with non-slip rubber feet for safety.

6. Fitted with an IP rated clear booted on/off mains switch at rear bath preventing ingress of moisture.

7. Sturdy construction - powder coated exterior providing a durable chemical resistant.

8. Built to latest safety standards and supplied with comprehensive operating instructions and Three-year warranty.

9. Recessed side lifting handles for ease of transportation.

10. Broad range of accessories available to suit wide range of applications - see accessories below.

11. Before leaving the factory each Centrifuge undergoes following:

  Uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data.

  Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.

  Checks are made on each unit running at maximum speed, interlock operation and rotor balance.

12. Carries the CE mark meeting the requirements of Low Voltage and EMC Directives.