Clock Spring Snap Wrap (SW) is an economical repair alternative for pipelines operating at less than 500 psi (3.45 MPa). It can be used to permanently repair external blunt defects with a depth of less than 90% of the nominal wall thickness.

Clock Spring® Snap Wrap (SW) consists of a high strength corrosion resistant fiberglass composite sleeve, a high performance adhesive, and a filler material. The composite split sleeves are uniquely shaped and sized to wrap around pipe diameters of 3/4” and larger. The individual layers are bonded together and to the pipe surface to fully restore serviceability.

Clock Spring® repairs are fast, economical and easy. Since no cutting or welding is required, there are no risks to the environment, release of greenhouse gases or waste disposal problems.

It’s simply the smartest pipeline repair decision you can make!

Use, Designed to repair/reinforce damaged or corroded sections of small diameter pipe operating up to 500 psi with less than 90% thru-wall loss.

Standard Configuration, 8 layers (number of layers may be modified based on manufacturer’s analysis).

Nominal Thickness, 3/8" (9 mm)

Application Temperature, 0°F to 120°F (-18°C to 49°C)

Service Temperature, -20°F to 130°F (-29°C to 54°C)
(For temperatures below -20°F (-29°C) contact CCP)

Material, E-glass and Polyester Resin

Width, 11.500" ± 0.500" (292 mm ± 13 mm)

Adhesive Specifications

Lap Shear Strength, > 1200 psi

Shelf Life, 12 months from Date of Manufacture

Filler Specifications

Compressive Strength, > 8000 psi

Shelf Life, 12 months from Date of Manufacture

Activator Specifications

Shelf Life, 12 months from Date of Manufacture.
(Note: Refrigeration at 38° - 52°F (3° -11°C) will extend material shelf life by an additional 3 months)