Pack’s structure is a unique concept in load bearing for equipment mounting. Pack utilizes a simple design of H-Gear shoulder straps and webbed belt.

Shoulder straps are heavily padded. Hip belt, shoulder straps, and pack webbing are designed to wick away perspiration.

High performance suspension system adjusts to accommodate virtually any size surveyor even with bulky cold weather gear.

UHMW high-dielectric plastic, back-mounted survey wire tray equipped with pre-wired 5/8-inch arbor.

Constructed of high impact strength polystyrene plastic case, mounted on back of pack with silicone wheel tensioning systems.

Hip belt contains water bottle and holder for additional 3-inch survey wire spool pouch.

Fully wired to accept voltmeter/data collector and data probe(s).

6 lbs (weight does not include survey wire or data collector).

Data collector mount: custom mounting brackets upon customers’ request.

 

11-½ inches long and 6-½ inches wide, shaped to fit most data collectors.

2 lbs

Lightweight UHMW high-dielectric plastic survey tray with stainless steel corner connector rings.

SECO type data collector cradle assembly.

Constructed of high-impact strength polystyrene plastic mounted  underneath survey meter tray.

Waist straps are used to stabilize the survey meter tray and hook to the back connector rings of the survey meter tray and to the survey pack waist band or the surveyor’s belt loops.

The connecting straps use a stainless steel trigger snap for quick connect and disconnect with survey meter tray’s corner connector rings.

The survey meter tray is fully wired and ready to use. Survey test/data probes can be connected to the splitter box’s 3-pin female plugs (right probe to the right plug and left probe to the left plug). Data lead wire with 3-Pin jack connects to the data collector/meter remote trigger port.