The fitting can be used to connect anyINSERTION device for a measurement in the pipe.
i.e. sensors, indicators, transmitters and controllers for flow, pH, ORP and conductivity
measurement.
Brass (CuZn39Pb2) & stainless steel (316L -1.4435), all in
stainless steel (316L -1.4435) or all in PVC, PP, PVDF, PE
• Universal fitting for INSERTION
The fitting has a built-in paddlewheel to measure the flowrate. When liquid flows through the pipe, the paddle-wheel is set in rotation producing pulses which frequency is proportional to the flowrate. This leads to a ver…
The fitting can handle particle sizes up to 250 μm. To prevent damagefrom dirt or foreign matter, we strongly recommend the installation of a250
The fitting can handle particle sizes up to 250 ìm. To prevent damagefrom dirt or foreign matter, we strongly recommend the installation of a250 ìm strainer as close as possible to the inlet side of the meter.The pipe m…
Compatibility With electronic SE30, SE32, SE35 with
Hall sensor principle (see separate data sheet)
Aluminium, PPS, stainless steel (316F)
airpurge of the system.Ensure the fitting is installed so that the rotor shafts are always in a horizontalposition. Flow direction is marked by an arrow on the body.When fluid passes through the fitting, rotors turn.
The Type ultrasonic flow sensor is intended for the measurement of water flows which may be slightly charged with contaminants. It consists of an electronic module and a brass fitting with a built-in measuring tube. It en…
This measuring element must be associated to an electronic module SE30, SE32, SE35 with hall sensor principle only, quickly and easilyconnected together by a Quarter-Turn.The design of this fitting is based on the oval ro…
The paddle-wheel flow sensor for continuousflow measurement is especially designed for
use in neutral, slightly aggressive, solid freeliquids in its magnetic measuring version and
for use in liquids which let pass the i…
泰亚赛福 —— 世界领先的检测仪器集成供应商 
您当前的位置：
