80358035在线浆轮传感器

The fitting S030 has a built-in paddlewheel to measure the flowrate. When liquid lows through the pipe, the paddle-wheel is set in rotation producing pulses which frequency is proportional to the flowrate. This leads to a very leak-proof construction, called the ”INLINE Quarterturn” technology. The paddle-wheel rotation is detected contactless through the fitting wall. The sensor unit can be snapped-on or removed without opening the pipe or interrupting the process.

General data

Pipe diameter DN 06 up to DN 65

Measurement range from 0.5 up to 1200 l/min

Flow velocity 0.3 up to 10 m/s (see flow diagram)

Accuracy1) Individual works calibration (Teach-In, via a remote transmitter) or

standard mean K-factor, see accuracy chart on next page.

Linearity1) ≤ ±0.5% of F.S.* (at 10 m/s)

Repeatability ≤ 0.4% of Reading*

Internal or external thread, weld ends, Clamp or flange

True union, spigot or external thread

FKM or EPDM (depending on version, see ordering chart)

Stainless steel (316L -1.4435), brass (CuZn39Pb2),

PVC, PP, PVDF

Stainless steel (316L -1.4435)

PVDF (PP on request or stainless steel, see data sheet 8030HT)

Ceramics (Al2O