MY-00087-00Model 240差压开关

Model 240

---

The Model 240 carries global certifications from CSA, UL, and ATEX. The diaphragm isolated Differential Pressure Switch is CSA Certified to both the Canadian and U.S. Standards and U.L. Listed to the U.S. Standards. In addition, it is certified to the ATEX directive Ex d, IIB + H2  with an IP 65 rating.

Mid-West Instrument’s new Hazardous Locations “Delta P” switches are provided with a field wireable terminal strip. The terminal strip eliminates the need to add a costly explosion-proof junction box near the switch.  Multiple outputs are available ranging from low power reed switches to higher load switching relay outputs.

Features and Benefits
A competitively priced Indicating Differential Pressure Switch for use in measuring the pressure drop across filters, strainers, separators, valves, and pumps in Hazardous Locations.

Total Separation of High and Low Pressures Sides

Simple, Rugged, Compact Design

Working Pressure 1500 PSIG (103 bar)

Over-range Protection to Maximum Presssure

Captive Cover Screws

The Entire Assembly is Certified for Hazardous Locations

 

 

 

 

 

Switch Options:

NOTE: For Ranges Greater than 60 PSID Minimum Switch Adjustability = 25%
† Product of the Switching Voltage & Current Shall Not Exceed the Power Rating
** Available Normally Open Only

Set Point Accuracy: 2%*

Interface:  1/2” Conduit / Cable Entry with 16 Position Terminal Strip

Enclosure:  NEMA 7 / Ex “d” (Flame-proof), IP65 Weatherproof rating

Switch Adjust: Internal to the Enclosure

Input Power: None. (For Reed switch Outputs) ; Required for Relay Output

Body:

Working Pressure:  1500 PSIG (100 bar)

Differential Over-range:  Same as Working Pressure

Range: 0-20" H2O (0-50 mbar) to 0-100 PSID (0-7 bar)

High Side to Low side Isolation:  Isolated (Diaphragm Style)

Process Connections: 1/4” FNPT End Connected (Standard)

Materials:  AL, 316 / 316L  SS,

Indicator:

Accuracy:  2%* 

Dial Size:  4 1/2” Standard None (Switch Only)