TX2TX2磁带张力计

添加时间：2010-5-28 15:32:24 担当：未知阅读：次

产品名称：TX2TX2磁带张力计
定货号：GN-00110-00

推荐：

TX2 Tape Tension Meter with rollers point away from operator

Special model where the rollers point away from the operator as the scale is viewed for applications where the access is limited to the front or top of the tape.

Cylindrical rollers are offered in 7, 10, 15, 20, 30, 36, 41 and 50 mm lengths. Roller length should not exceed 2x the width of the material being measured.

Tension Ranges: Refer to DX2 Data Sheet.

NOTE: Starting point of low-range instruments will be higher than DX2.

Note: This model does not include a filament guide and material thickness compensator

Features

Dual-flanged outer guide rollers with various widths for better filament guide (single-flanged rollers optional, recommendable if the material beeing measured is wider than the tape roller)

Tape rollers with contact surface from 7 mm up to 50 mm are available

Roller shifting mechanism ensure easy acquisition of the running material

Finger Support: We recommend mounting a finger support for higher tension ranges

Built-in mounting holes permit fixed installation for online use

Tension Ranges

Model	Range	Outer Roller Spacing	Roller Widths
TX2-5	10 - 50 g	57 mm	7
TX2-12	20 - 120 g	57 mm	7,10,15,20,30
TX2-20	20 - 200 g	57 mm	7,10,15,20,30
TX2-40	20 - 400 g	57 mm	7,10,15,20,30
TX2-SP	20 - 1000 g	57 mm	7,10,15,20,30,36,41,50
TX2-200	200 - 2000 g	117 mm	7,10,15,20,30,36,41,50
TX2-500	400 - 5000 g	117 mm	7,10,15,20,30,36,41,50
TX2-1K	2.5 - 10 kg	117 mm	7,10,15,20,30
TX2L-2K	5 - 20 kg	117 mm	7,10,15,20

Tape Rollers

Roller Widh	Line Speed ...m/min	Roller Material
7 mm	1000	Nickel-plated steel
10 mm	1000	Hardcoated aluminium
15 mm	1000	Hardcoated aluminium
20 mm	1000	Hardcoated aluminium
30 mm	1000	Hardcoated aluminium
36 mm	1000	Hardcoated aluminium
41 mm	1000	Hardcoated aluminium
50 mm	1000	Hardcoated aluminium

Specifications

Accuracy	± 1% of full scale or ± 1 graduation mark on scale
Diameter of Scale	41 mm
Maximum Speed	1000 m/min
Roller Material	Hardcoated aluminium
Housing Material	Die-cast aluminum
Temperature range	50 - 113°F (10 - 45°C)
Air humidity	85 % RH, max.
Housing dimensions(L x W x H)	7.5 x 3.3 x 1.8 in(188 x 85 x 45 mm)
Weight, net (gross)	1.2 lbs (3 lbs)