PaintCheckPaintCheck涂层测厚仪

PaintCheck Paint Thickness Gauge

PaintCheck provides fast, non-destructive coating thickness measurements on steel and non-ferrous metals. It is intended for use by car dealerships, auto body shops , insurance adjusters and similar users who only need a simple, one-handed basic gauge. The resolution is limited to 0.5 mils (5 µm) and should not be confused with our other "precision" gauges as this is adequate for basic thickness "checks".

Simply place the gauge on the surface to be tested. An accurate thickness reading appears almost instantaneously on the large, easy-to-read display—without scratching or damaging the surface in any way.

PaintCheck automatically selects the optimum measuring method (magnetic induction or eddy-current). No calibration is required.

In addition, PaintCheck provides valuable information about the coating structure, such as paint top coats or body fillers. For example, if the measured thickness value is significantly greater than the expected paint thickness, this would indicate the use of filler material or repainting.

Speed, versatility and ease of use make PaintCheck a valuable tool for a wide range of paint inspection tasks. Especially the basic tasks, not requiring the highest possible resolution.

Range

Fe: 0 – 80.00 mils (0 – 2000 µm)
NFe: 0 – 80.00 mils (0 – 2000 µm) 

Accuracy

±0.5 mils plus 5% of reading
±5 µm plus 5% of reading 

Display

4-digit alphanumeric, 0.4” (10mm) height 

Minimum Measuring Area

1.6" x 1.6" (40mm x 40mm) 

Minimum Substrate Thickness

Fe: 30 mils (0.75mm)
NFe: 10 mils (0.25mm) 

Calibration

Factory calibration 

Operating Temp.

32 °F to 122 °F (0 °C to 50 °C ) 

Surface Temp.

5 °F to 140 °F (–15 °C to 60 °C ) 

Battery Type

2 AAA 1.5V 

Dimensions

4.3" x 2" x 1" (110 x 50 x 25mm) 

Weight

3.2 oz (90 g) 

Protection Class

IP 52 (proof against dust and dripping water) 

Standards

DIN, ISO, ASTM, BS 

Warranty

1 year