TI-25DL-MMXTI-25DL-MMX数据记录Through Paint超声波测厚仪

添加时间：2010-5-26 10:07:48 担当：未知阅读：次

产品名称：TI-25DL-MMXTI-25DL-MMX数据记录Through Paint超声波测厚仪
定货号：GA-00603-00

推荐：

Data Logging Through Paint Ultrasonic Wall Thickness Gauge

Measuring Range in Steel
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).

The new CHECK-LINE TI-25DL-MMX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

The TI-25DL-MMX can be used in a Single Thickness Reading mode or in a Scan mode, where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The TI-25DL-MMX incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The TI-25DL-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

Features

Ability to measure through paint and eliminate coatings

Resolution of 0.001 inch (0.01 mm)

Large, backlit LCD display retains last reading

Simple operator controls virtually eliminate training

RS-232C Serial output for downloading stored data to a printer or computer

Memory for 1000 data points in up to 10 batches

Special-purpose probes are offered for a variety of applications

Switch-selected units for inches or mm

For underwater surveying, probe cable lengths up to 50 feet are optionally

CE Certified

Includes NIST-Traceable Calibration Certificate

Specifications

Range	Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters). Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters).
Resolution	.001" (0.01 mm)
Display	4½ - Digit, 0.5" Backlit LCD
Velocity Range	0.0492 to .3937 in./µs. (1250 to 10,000 meters/second)
Probe	5 MHz, 0.25" Diameter (6.35 mm)
Probe Wearface	PEEK (Polyethlethylketone)
Cable	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Temp. Limits	Ambient: -20 to 120° F (-30 to 50° C) Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available
Serial Output	RS-232C (8, N, 1, user-set baud rate)
Battery Type	Two AA batteries
Battery Life	200 hours
Weight	7 ounces (196 g)
Size	2.5 x 4.5 x 1.25" (64 x 114 x 32 mm)
Accessories Included	Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.