UDT-40测厚仪

Precision, not having analogues of Russia, universal ultrasonic thickness gauge with high reliability of the testing. Presence A –scan excludes such typical mistakes at measurement of thickness as doubling of indications, and B-scan allows observing a structure of a bottom of a product. Thickness gauge realizes various ways of the testing of thickness - measurement of time on transition through "zero", measurement of time between signals, and also frequency and correlation methods of measurement.
Presence of the built in contours of the coordination, adjustable width of a pulse and three electric damping allows to use for measurement any transducers with frequencies from 0,5 up to 15 MHz, both single element and dual type.

 

Basic Delivery Set

UDT-40 thickens gauge electronic module

Electric power supply 220 V

Probe cable SR 50-Lemo 2 pieces

Two transducers

Interface cable RS 233 for connection PC

Software support for PC

Transport bag

Universal Delivery Set

Base delivery set

Protective boot

Module for batteries size "D" 9000

Set batteries NiMh size "D" 9000 mA/hr

Universal charging device

Additional implements

Adapter circuit for connection to USB to port of the PC

Sample of gauge "stupenika"

Ultrasonic transducers for diverse application

Certificated sample of gauge from different fusion

 

Technical Characteristics

Calibrition range

min.: 0 - 2.9 mm (steel); 0 - 1 mks
max.: 0 - 2975 mm (steel); 0 - 1000 mks

Sound velocity range

1000 - 9999 m/s

Pulse shift

up to -0,5 mks to 996 mks

Damping

50 оhms / 1000 ohms (to 25 ohms in simultaneous mode)

Input impedance

50 оhms / 600 оhms

Sound impulse

quadrangular, amplitude 200V,
with change interval up to 50 to 500 ns,
with step 25 ns

Amplifier

broadband 0.5-15 MHz (-6 dB)

Controllable gain

90 dB, with step 0.5, 1, 2 and 6 dB

Rectification

positive or negative half wave,
complete, radiofrequency signal

Reject

compensate, 0-80% screen height

Inspection zone

two independent monitor gates with individual logic

Alarm

luminous and sonorous

Measurement resolution

to 0 to first signal in zone or between
signals in zones

Dispaly

LCD with regulate contrast and backlight
or with regulate brightness
110х65 mm; 240х128 pixels

Memory

100 datasets for transducers
750 results of measurements with A-scan, parameters of the transducer, date and time

Interface

RS232 or USB

Size transducer

Lemo0 or BNC (optional)

Batteries

4 NiMh size "D"

Operating time

minimum 8 hours

Mains power

external block power 220V AC

Power consumption

maximum 5W, depending
on setting parameters

Operating temperature

up to -20 C to +55 C (ELD)
up to -5 С to +55 С (LCD)

Dimensions (H x W x D)

160 mm x 225 mm x 45 mm

Weight

2 kg with 4 batteries size "С"