UD2V-P46超声波探伤仪

New model ultrasonic flaw detector, combining advantages of device UD2V-P45 with the expanded functions to measure and record results of the testing:

simultaneous measurement of amplitude and coordinates position of a maximum signal;

simultaneous measurement of distance on-beam and defect coordinates for angle trasdusers;

a mode of record bending around a signal maximum in a examination area, with B-scan display;

the expanded memory options and results of the testing;

software support for several databases of the testing reports on the personal computer with ReportConstructor function

full-screen an operating mode (LD-version)

possibility to connect one of 7 built-in matching elements, for optimum work with any transducers

The algorithm of record realized in the device bending around a signal maximum differs from similar modes in similar devices of other firms. As a rule, it is a so-called mode "Peak freezing", when the device memory the maximum value of amplitude of a signal in each point of range. Unlike such mode, realized in UD2V-P46 the method allows to construct bending around remembering only on one point in each probing impulse - by position and value of the maximum amplitude of an echo-signal in a testing zone.
Such mode gives the chance to receive, for example, the move diagramme maximum a signal at cross-section scanning of defect in welded joints and to estimate its conditional extent, and also it is easy to define reflector coordinates at the maximum amplitude of the reflected signal.

 

One more considerable improvement in new model - increased to 100 quantity of options, with record of the A-signal and possibility to input a name of adjustment from the device keyboard, and as possibility of preservation to 750 results of the testing (15 files on 50 results). Each result represents the full report of the testing and consists of an A-signal, bending around a maximum (if the result is kept in this mode), digital value of result of measurement (amplitude and coordinates, distance on a beam and coordinates or speed ultrasonic), all parameters of work of the device, date, time and a name of the result entered from the keyboard of the device. All results can be looked through and renamed further both in the device, and by means of the software on the computer. Software UdReport, allowing completely automating processing results of the testing is for this purpose intended, dividing them on different bases of reports and defining various additional parameters of the testing on the basis of the identifiers containing in a name of result. Besides, the program has function of the designer of the reports, allowing creating printing forms of reports of any kind depending on requirements of the concrete user.

 

 

Basic Delivery Set

UD2V-P46 main unit

Power supply 220V/9V

Probe cable SR50-Lemo 2 pieces

Four transducers. (P111-2.5-К12, P111-5-Кb, P121-2.5-40, P121-5-65)

Cable RS232 for connection PC

Software support for PC

Documentations

Transport bag

Additional implements

Protective bag

Module for batteries size "D"

Set batteries NiMh size "D" 9000 mA/hr

Universal charging device

Adapter circuit for connection to USB to port of the PC

Ultrasonic transducers for diverse application

Standard samples

Technical Characteristics

Calibration Range

min.: 0 - 2.9 mm (steel); 0 - 1 mks
max.: 0 - 2975 mm (steel); 0 - 1000 mks

Sound velocity range

1000 - 9999 m/s

Pulse shift

up to -0,5 mks to 996 mks

Pulse delay

0 - 100 mks

Damping

50 ohms / 1000 ohms (to 25 ohms in simultaneos modes)

Input impedance

50 ohms / 600 ohms

Soud impulse

quadrangular, amplitude 200 V,
with change interval up to 50 to 500 ns,
with step 25 ns

Pulse repetition frequency

to 800 Hz in a mode of the maximum frequency and 40 Hz

Amplifier

broadband 0.5-15 MHz (-6 dB)
the filtres 1.25, 2.5, 5 and 10 MHz

The coordination with PET foreign manufacturers

7 contours of the coordination with face values:
0,66; 1; 2,2; 3,3; 4,7; 6,8 and 15 mkHz

Contollable gain

110 dB, with step 0.5, 1, 2 or 6 dB

TGC/DAC

90 dB, 10 dB/mks
with curve construction on 10 reference points
entered manually or from testing reflectors

Rectification

positive or negative half wave,
complete, radiofrequency signal

Reject

linear, 0 - 80% screen height

Monitoring gate

two intependent monitor gates with individual logic,
sound indication

Alarm

luminous and sonorous

Operating modes alarm

defect in the first zone,
defect in the second zone,
defect in the first and in the second zones,
defect in one of zones,
on DAC - signal comparison
in the first zone from a curve amplitude-distance.

Sound path measurement

up to 0 to first signal in zone or between signals in zones

Measurement resolution

3.125, 6.25, 12.5 or 25 ns depending
on setting frequency

Display of amplitude

as a procentage of the screen height,
in dB to referencetest echo,
in dB referens to DAC curve

Display

LCD or ELD with adjustable contrast and backlight,
110 х 65 mm; 240 х 128 pixels

А-signal

73 mm x 50 mm; 160 x 100 pixels
in mode "full-screen": 240х128 pixels

Memory

100 datasets with А-signal and name,
750 (15 files on 50) the reports of the testing

Interface

RS232

Dimensions transducer

2 SR50 or Lemo1

Batteries

4 NiMh size "D"

Operating temperature

LCD : 12-16 hours (depending on setting);
ELD: 7-8 hours (depending on setting)

Mains power

via external plug-in power unit 220 V AC

Operating temperature

LCD: up to -5°C to +55°C

ELD:  up to -25°С to + 55°С

Dimensions (H x W x D)

160 mm x 225 mm x 45 mm

Weight

2.5 kg with 4 batteries