TI-007DL数据记录精密超声波测厚仪

TI-007DL Data Logging Precision Ultrasonic Wall Thickness Gauge

Measuring Range in Steel
0.0060 - 1.000 inches
0.150 - 25.40 mm

The TI-007DL is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.

The TI-007DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.

The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics. 

Range in Steel

0.0060-1.0000" (0.15-25.40 mm)  

Resolution

.0001" (0.001 mm) 

Display

4½ - Digit, 0.5" Backlit LCD 

Velocity Range

6,500-33,000 ft./sec (2000-10,000 m/sec.) 

Transducer

Single element with delay tip. 10 to 22 MHz frequency range.  

Probe Wearface

PEEK (Polyethlethylketone) 

Cable

4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m) 

Serial Output

RS-232C (8, N, 1, user-set baud rate) 

Temp. Limits

Ambient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C) 

Battery Type

Two AA batteries 

Battery Life

150 hours 

Weight

7 ounces (300g) 

Size

2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm) 

Accessories Included

Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.