|
Housing: |
PE/PC (GF10) |
|
Thermostatic control: |
Insulated lower part (sample compartment) (insulation thickness 40 mm) Option: freezer packs (200x10x8 mm) Option: compressor cooling (12V/115V/230V) |
|
Control: |
Microprocessor control, foil keyboard, back lit four-line LC-display |
|
Data logger: |
Nonvolatile data memory; storage of sampling and malfunction data like sample extractions, bottle changes, messages, external signals |
|
Programming: |
6 user programs (can be edited freely) |
|
Program start options: |
Immediately; at a certain time; by an external signal |
|
Program stop options: |
End of sampling program after one program run; continuous operation |
|
Pause mode: |
Interruption of program run at any time |
|
Overfilling protection: |
Adjustable from 1–999 samples/bottles |
|
Interval setting: |
1 min. to 99 h 59 min. in steps of 1 minute |
|
Pulse setting: |
1 to 255 pulses/sample |
|
Manual sample extraction: |
Possible at any time without interrupting the current program run |
|
Program protection: |
Up to 5 years after voltage loss |
|
Interface: |
RS 232 |
|
Communication: |
|
|
Modem GSM communication: |
Optional (in combination with PC software) |
|
Languages: |
Multi-language, selectable |
|
Signal inputs: |
• 1 x analogue: 4-20 mA, optional 0-20 mA, minimum voltage 3,3 V (optocoupler) • 5 x digital (flow, event, 3 inputs can be programmed freely) |
|
Signal outputs status messages: |
Max. 8 digital outputs, depending on device version; freely programmable |
|
Sampling method: |
-Vacuum system 20-350 ml -Vacuum VAR (variable) system 20-350 ml |
|
Single sample volume accuracy: |
< 2,8 % |
|
Suction height: |
max. 6,5 m (at 1013h Pa) |
|
Pumping speed: |
>0,5 m/s at suction height up to at least 5 m (at 1013h Pa); pump capacity can be adjusted electronically |
|
Suction hose: |
PVC, L=5 m, ID=9 mm (ID 16 mm at flow-proportional option). Max. hose length 30 m |
|
Sampling modes: |
Time-related, flow-dependent, event- related. (Option: flow-proportional) Manual sample extraction. |
|
Bottle variants: |
24 x 1 l PE bottle (standard) 13 l composite container 25 l composite container 4 x 5 l PE bottle 16 x 1 l bottle with freezer packs |
|
Overall dimensions: |
(Hxwxd) 787 x 510 x 468 mm 1030 x 548 x 470 mm with compressor cooling |
|
Weight: |
22,4 kg 24x1 l 34 kg 24x1 l with compressor cooling. (Device incl. empty bottles and battery but no suction hose) |
|
Power supply: |
12 V/ 10 Ah lead storage battery (maintenance-free, leak proof); 115V or 230V operation by means of battery charger in buffer mode. Range 11-14V; power consumption max. 30 W |
|
Power requirement number of samples: |
Approx. 2000 sample extractions per battery charge [determined at 20° C ambient temp., 1,5 m suction height, 1 min. sampling interval] incl. distributor advance |
|
Ambient temperature: |
0 – 45° C |
|
Sample temperature: |
0 – 40° C |
|
Standards: |
Device meets ISO 5667 standard |
|
Wetted materials: |
PVC, Silicone, PS, PE |
|
Accessoires: |
Battery charger IP 20 or IP 65
Strainer basket
Freezer packs
Replacement bottles
Folding transport trolley
Isobox with passive cooling (freezer packs/ice) or with active cooling (compressor cooling)
12V / 85 Ah lead storage battery for Isobox with active cooling
Isobox to be used as transport box with cover
GSM modem
PC communication software |
泰亚赛福 —— 世界领先的检测仪器集成供应商 
您当前的位置：
加入对比
