8206PH转送器

The fitting can be used to connect any  INSERTION device for a measurement in the pipe. i.e. sensors, indicators, transmitters and controllers for flow, pH, ORP and conductivity measuremen。

General data

Pipe diameter DN 06 up to DN 4001)

Internal or external thread, weld ends, clamp or flange

True union, spigot or external thread

Body & adaptation part

FKM or EPDM

Brass (CuZn39Pb2) & stainless steel (316L -1.4435), all in

stainless steel (316L -1.4435) or all in PVC, PP, PVDF, PE

• Universal fitting for INSERTION sensors, transmitters,

batch controllers in pure, aggressive or contaminated liquids

• Large range of process connections: DN 06 to 400

in PVC, PP, PVDF, PE, stainless steel, brass

• Electronics available for

- Indication, Monitoring, Transmitting

- On/Off control, Batch control

Medium data

Fluid temperature 0 up to 50°C (32 to 122°F) for fitting in PVC

0 up to 80°C (32 to 176°F) for fitting in PP

-15 up to 100°C (5 to 212°F) for fitting in PVDF

-15 up to 160°C (5 to 320°F) for fitting in stainless steel or brass

Temperature limits may depend on the inserted device. Refer to the relevant data sheet or instruction manual and the temperature/pressure curve of the fluid on next page. If the temperature ranges given for the adapter and the inserted device are different, use the most restrictive range.

Pressure limits may depend on the inserted device. Referto the relevant data sheet or instruction manual and the temperature /pressure curve of the fluid on next page. Ifthe pressure ranges given for the adapter and the inserted device are different, use the most restrictive range。