酸度/离子计

A high-quality, bench-type lab pH meter designed to measure the entire pH scale (0-14).

 

The Lab Model Digital pH/Ion Meterhas a milli-volt range of +/-1000mV and easily converts from 115- to 230-volts AC power by use of a conveniently mounted switch. The unit provides accuracy and readability of 0.01 pH.

 

The automatic temperature compensation (ATC) range on this instrument runs from 0° to 100° centigrade. The ATC probe (included with meter) plugs into the front panel of the meter and automatically adjusts the readout to measure temperature variations in the fluid. The analog recorder output may be continuously used in conjunction with a recorder to display and record the pH measurements.

 

Laboratory Bench-type pH Meter provides stable, accurate measurements in pH, mV and temperature. Built-in memory function stores up to 50 pH, mV or relative mV readings with corresponding temperature. This meter is so easy to use; you'll be ready to take readings in minutes!

 

The Lab Model pH Meter features a large dual display that shows pH (or mV) and temperature readings, and a water-resistant membrane keypad. Slide-out instruction card (included) stores underneath the meter for quick reference. This pH meter is supported by a full selection of Fann calibration buffers, electrodes and accessories.

 

Features

Large dual display shows pH or mV, plus temperature

Three-point pH calibration with auto buffer recognition

ISO 9001 CERTIFIED

Selectable buffer sets

Lab Model Digital pH/Ion Meter

Combination pH Probe

Soaker Bottle and Soaker Solution

Automatic Temperature Compensation (ATC) Probe

Switch from pH to mV readings with a button press

Features 0.1 mV resolution for ORP measurements

Selectable manual or automatic temperature compensation

Built-in memory function

Hold function, Ready indicator, and diagnostic error messages

Fully diagrammed manual, plus slide-out instruction card

 

Specifications