首页 > 工业检测 >  无损检测设备 > 测厚仪 > 涂层测厚仪 > ТМ-3涡流测厚仪
ТМ-3涡流测厚仪
ТМ-3涡流测厚仪
订货号: MM-65647-00
产地: 俄罗斯
品牌:
开发编号: N
市场价:
*此产品根据配置不同价格不同
*此价格为参考价格,具体价格以订单合同为准
    我在现场:
    产品视频:
  • 产品描述
  • 技术参数
  • 技术文档
  • 相关产品
  • 明细价格
  • 购买流程
产品描述:

Thickness gauge it is intended for local measurement of a thickness of galvanic coatings like this zinc, cadmium or chromium on steel, and silver or copper on titanium.

ТМ-3 has memory on 5000 results of measurements (50 files on 100 results), interface RS232 for connection to the personal computer, a mode of selective averaging of results and possibility of programming to 15 approximate scales, both from the device keyboard, and from the personal computer. Additional, deliveried special transducers with possibility to access in out-of-the-way place.
 
Possibility of record to 15 approximate scales
Adjustable brightness of the screen
The mode of selective averaging
Memory on 5000 results of measurements
The mode of temperature correction
The mode of the automatic alarm system of defect
Mains power: 3 element "AA"
The mode of autoswitching-off
Possibility of the order of transducers of various configurations
Weight 0.3 kg
 
Basic Delivery Set
 
 
ТМ-3 electronic module thickness gauge
Transducers
Cable RS232 for connection PC
Software support for PC
Operating manual
Batteries
Transport bag
 
Technical Characteristics
Coating thickness measurement range
up to 0 to 100 mm
Indication accuracy
1, 0.1, 0.01 or 0.001 - is set at programming scales
Measurement accuracy
3%
The type of display
graphic LCD with switchable backlight and contarst
Dimensions screen (H х W)
21 х 56 mm
Memory results
5000 results (50 files on 100 results)
Communication with PC
interface RS232
Scales
15 programmable direct from keypad
or by PC scales, up to 10 points for
linear approximation
Software support
Dlogger
Scale
Mains power
3 element "АА"
Operating time
not less than 50 hours
Autoswitching-off
after 90 sec
Operating temperature
up to -10 C to +50 C
Base Unit Dimensions (H x W x D)
170 mm x 85 mm x 30 mm
Dimensions transducer (diameter х height)
11 mm x 60 mm
Weight
350 g
 


品牌简介

Scientific-Production中心“Кropus”是拥有十多个子公司的无损检测技术的研发及生产设备的企业。Kropus公司成立于1989年,员工多数来自Pribor。有超过30年的行业经验,在应…Scientific-Production中心“Кropus”是拥有十多个子公司的无损检测技术的研发及生产设备的企业。Kropus公司成立于1989年,员工多数来自Pribor。有超过30年的行业经验,在应用无损检测及技术诊断方法上结合现代电子和无线电信号分析与处理,建立了一个范围广泛的现代设施超声波、涡流磁场。Kropus认可俄罗斯Gosstandart计量实验室,允许“Kropus”使用他们的方法来测量。

您最近浏览的商品

美国泰亚赛褔