首页 > 工业检测 >  无损检测设备 > 测厚仪 > 涂层测厚仪 > ТМ-2涂层测厚仪
ТМ-2涂层测厚仪
ТМ-2涂层测厚仪
订货号: MM-65646-00
产地: 俄罗斯
品牌:
开发编号: N
市场价:
*此产品根据配置不同价格不同
*此价格为参考价格,具体价格以订单合同为准
    我在现场:
    产品视频:
  • 产品描述
  • 技术参数
  • 技术文档
  • 相关产品
  • 明细价格
  • 购买流程
产品描述:

Thickness gauge it is intended for measurement of a thickness of protective and decorative coatings (a paint, varnishes and etc.), put on a ferromagnetic or non-ferromegnetic material.
Simplicity to use, absence of service functions such as memory of results, programming of scales, averaging etc., but thus excellent measuring characteristics and low cost, do this device by the best in the ratio the price/quality. Thickness gauge is certificated of Gosstandart of Russia (the certifecate RU.C.27.003.A № 16287 ), is registered in the National register measurements instruments under №25868-03.
 
Use tables for measurement of a thickness of coverings on various materials
Possibility of calibration of the device on one type of a material (means of the manufacturer)
Mains power: 1 element of type "Кrona"
Weight 0.3 кg
Basic Delivery Set
ТМ-2 electronic unit with transducers
PC software support for scales calculation
Operating manual
Batteries
Transport bag
Technical Characteristics
Coating thickness measurement range
20 to 2000 um
Thickness of test object
not less than 2 mm
Mains power
"Кrona" batterie type
Operating time
not less than 50 hours
Operating temperature
-10 C to +50 C
Base Unit Dimensions (H x W x D)
170 mm x 85 mm x 30 mm
Dimensions transducer (diameter х height)
22 mm x 55 mm
Weight
300 g
 
 


品牌简介

Scientific-Production中心“Кropus”是拥有十多个子公司的无损检测技术的研发及生产设备的企业。Kropus公司成立于1989年,员工多数来自Pribor。有超过30年的行业经验,在应…Scientific-Production中心“Кropus”是拥有十多个子公司的无损检测技术的研发及生产设备的企业。Kropus公司成立于1989年,员工多数来自Pribor。有超过30年的行业经验,在应用无损检测及技术诊断方法上结合现代电子和无线电信号分析与处理,建立了一个范围广泛的现代设施超声波、涡流磁场。Kropus认可俄罗斯Gosstandart计量实验室,允许“Kropus”使用他们的方法来测量。

您最近浏览的商品

美国泰亚赛褔