产品描述:
|
全固态。 继电器或接触没有穿。
紧凑,坚固,轻便。
温度稳定
证明了数千名用户现场条件下的坚固。
信号的频率和速率可变灭弧调整最佳信号。
接收器具有高灵敏度的四阶段放大器。
源运行在12伏直流电源。可以采用外部汽车电池。
可充电可凝胶电池。
接收器和发射器互锁,以防止对存储转为单位。
灭弧室是信号的频率和速率可变,使操作者调整最佳信号。
三个输出阻抗范围为级放大器。
维修有限公司改变或充电电池。
|
Model 715 by Nilsson Electrical Laboratory Inc. is an all solid state, conductive-type pipe and cable locator.
It is great for solving cathodic protection problems as well as determining exact location and depth of pipes and cables.
A signal is applied to pipe or cable and can be accurately followed over long distances.
The transmitter tone is designed with variable frequency and interrupter rate, and can be adjusted for distinctive signal under any conditions.
It has three output impedance taps for efficient matching to all soil conditions.
The Transmitter and Receiver are interlocked, preventing storage with batteries turned on.
Power can be provided by a 12 Volt lantern battery or by a external 12 Volt source.
A battery warning light indicates when the battery needs to be replaced.
Model 715 can also be powered by an external rechargeable 12 Volt Battery, Nilsson Model 110 (described below).
The transmitter and receiver assembly are housed in a rugged, lightweight, weatherproof aluminum case measuring 7" x 7" x 11". This case provide ample storage room for accessories. Approximate weight is 9 lbs.
购买流程:
①购买产品:点击“生成订单”→填写产品数量、联系方式并提交→会员顾问订单处理→合同签订。
②咨询产品:请联系会员顾问或致电会员客服电话。
③如果您还不是我们的会员,请先注册。
④最小起订数量:1
注意:本产品唯一个人现金委托收款人,如汇入其它个人账户本公司不承担任何责任
维护担当:
上线时间:
投诉电话:13801126385 13911302309
泰亚赛福作为众多知名品牌的合作伙伴,优惠的价格+完善的售后服务体系向您提供产品。font>