This mechanical single paddle Sensor/Switch is speciallydesigned for monitoring minimum/maximum values of flow.The switching point can be set by turning a spring screw.The switching is done by a moving magnet and a reed contact.The connection to the process in the piping is done with the„easy to connect“ quarter-turn technique of the INLINE fittings

Process Specification

Pipe diameter DN 15…DN 50

Switching range see table

Fitting Bürkert INLINE fitting S010

Housing material PC+20% glass fiber

Sensor element reed contact on single paddle

Electrical Specification

Reed contact output:

Max. switching voltage 30 VDC, 250 VAC

Max. switching current 1 A

Max switching power 50 W

Recommended

max. cable length 100 m shielded,

section 0.14...0.5 mm2

Electrical Connections

Optional EaseOn cable plug 3 wire, plug in-turn off

Cable plug DIN 43650A

Environment Specifications

Fluid temperature max. 55°C

Ambient temperature max. 0…+55°C

Fluid pressure max. PVC, PP, PVDF: PN10