The fitting can be used to connect anyINSERTION device for a measurement in the pipe.

i.e. sensors, indicators, transmitters and controllers for flow, pH, ORP and conductivity

measurement. Medium data Fluid temperature 0 up to 50°C (32 to 122°F) for fitting in PVC

0 up to 80°C (32 to 176°F) for fitting in PP -15 up to 100°C (5 to 212°F) for fitting in PVDF

-15 up to 160°C (5 to 320°F) for fitting in stainless steel or brass

Temperature limits may depend on the inserted device. Refer to the relevant data sheet or instruction manual and the temperature/pressure curve of the fluid on next page. If the temperature ranges given for the adapter and the inserted device are different, use the most restrictive range. Fluid pressure (max.) Metal Plastic PN 16 (232.16 PSI) PN 10 (145.1 PSI)

Pressure limits may depend on the inserted device. Refer to the relevant data sheet or instruction manual and the temperature/pressure curve of the fluid on next page.