Remote Frequency Control
The TraceMaster II is the first pipe and cable locator on the market to offer a Remote Link between the transmitter and the receiver units. This is accomplished through a radio frequency (RF) two-way communications channel, and makes it possible to change the transmitter frequency from the receiver up to 1500 feet away.

 

Versatile
With four classes of frequencies, the TraceMaster is the most versatile locator on the market. The low range frequency is the best choice for tracing over long cable lines. Medium range frequencies are generally the most useful range for location. If the signal is weak during the beginning of a trace, you can switch to a higher range frequency. Very high range frequencies are good for rapidly sweeping for all utilities in a congested area.

 

Easy to Use
The TraceMaster II features simple operation with only two buttons and two knobs.
No transmitter settings are required. In addition, the receiver has the ability to operate in manual or automatic gain modes.

The receiver's LCD panel is uncomplicated and intuitive. The information display is large and easy to understand, while including everything required to monitor the transmitter remotely.

 

Reliable and Trouble Free
Schonstedt’s locators have been setting the standard for reliability and dependability for nearly half a century. Our locators are designed to withstand the rigors of daily on-site usage and a wide range of environmental conditions.

The TraceMaster II is backed by a three year warranty which is the longest in the industry. No periodic calibration is required.

 

Choice of Options and Models
There are several TraceMaster II options. The top of the line model offers four active frequencies (575Hz, 8kHz, 455kHz) and two passive frequencies (50Hz or 60 Hz) with a radio link to control the transmitter from the receiver like a remote. Choice of sonde or passive

 

cathodic is available.

Less costly models offer four manual frequencies, single frequencies, passive frequencies only, and no radio link. Virtually any combination of these features is available.

Additional Features Include:

Passive detection of 50Hz or 60Hz, sonde or cathodic frequency

One button depth measurement

Digital readout display of signal strength

LCD displays left, right and "on-target"
indications, as well as battery status

60-Hours operational life (intermittent usage)

Lightweight, easy-to-use design

Digital Signal Processing which is easily
upgraded as new features are developed

Standard Equipment
The TraceMaster II comes with an extensive package of standard equipment including: