CHLOR*TEST "CSN Salts" Test Kit

Recommended for surface testing on:

Pipelines

Storage tanks

Bridges

Aircraft

Mining facilities

Ships

Marine structures

Cooling towers

Power plants

Offshore rigs

Petrochemical plants

Pulp and paper mills

Steel fabrication

Electronics

Cross-contamination is eliminated with one-time use components.

Nitrate testing is easy and measures a wide 0-50 ppm range.

Easy to perform -- does not require special training.

   CHLOR*TEST "CSN Salts" offers to the specifier the availability of trouble-free performance testing, in the field, for chlorides, sulfates and nitrates with one extraction.

CHLOR*TEST "CSN Salts" uses a unique patented extract solution, CHLOR*EXTRACT™, to retrieve surface salt contamination. This special extract enhances retrieval rates, thereby increasing accuracy. The greater the retrieval rate, the more accurate the test results. Surface sampling is simplified by use of the patented CHLOR*SLEEVE™. Sampling can be done overhead, vertically, horizontally, or at any angle with this device.

All test results are measured directly in parts per million. No conversion charts are needed. Part-per-million readings are a 1-to-1 ratio to micrograms per square centimeter. No mathematical calculations are necessary.

EPA-compliant. No need to select a low or high range. Meter range is 0-100 ppm with auto-zero.

European CE Mark of compliance for electromagnetic compatibility and safety.

Quantitative results achieved in minutes.

Five (5) individual tests per test kit. Test kit refills available.

All components are pre-measured and pre-dosed for accuracy.