泰亚赛福
产品

打造中国最大 品种最全 供货速度最快 行业专家技术支持的检测仪器供应平台

所有产品分类

工程/物探/测绘仪器

阴极防护/腐蚀控制

首页 > 工程物探测绘-地球物理探测 >  阴极防护/腐蚀控制 > 腐蚀控制与阴极保护仪器 > 线缆管线定位仪 > 管道定位仪


管道定位仪
管道定位仪
订货号：MM-80755-00

400-000-1836
分机：
产地：美国
品牌：
市场价：
普通会员价：
* 此产品根据配置不同价格不同
* 此价格为参考价格，具体价格以订单合同为准
  • 产品描述
  • 技术参数
  • 技术文档
  • 相关产品
  • 明细价格
  • 购买流程
产品描述：

Model 715
All solid state. No relays or contacts to wear.
Compact, rugged, lightweight.
Temperature stabilized
Proven by thousands of users under rugged field conditions.
Signal frequency and interrupter rate variable to adjust for optimum signal.
Receiver has high-sensitivity four-stage amplifier.
Operates on 12 VDC power source. Can be powered by external car battery.
Available with rechargeable gel-cell battery.
Receiver and transmitter interlocked to prevent storage with units turned on.
Signal frequency and interrupter are rate variable to allow operator to adjust for optimum signal.
Three output impedance ranges for stage amplifier.
Maintenance limited to changing or recharging battery.
Features
Model 715 by Nilsson Electrical Laboratory Inc. is an all solid state, conductive-type pipe and cable locator. It is great for solving cathodic protection problems as well as determining exact location and depth of pipes and cables. A signal is applied to pipe or cable and can be accurately followed over long distances. The transmitter tone is designed with variable frequency and interrupter rate, and can be adjusted for distinctive signal under any conditions. It has three output impedance taps for efficient matching to all soil conditions. The Transmitter and Receiver are interlocked, preventing storage with batteries turned on.
Power can be provided by a 12 Volt lantern battery or by a external 12 Volt source. A battery warning light indicates when the battery needs to be replaced. Model 715 can also be powered by an external rechargeable 12 Volt Battery, Nilsson Model 110 (described below).
The transmitter and receiver assembly are housed in a rugged, lightweight, weatherproof aluminum case measuring 7" x 7" x 11". This case provide ample storage room for accessories. Approximate weight is 9 lbs.
Nilsson Model 110
Rechargeable 12 Volt Battery Pack
Much more economical than replacing lantern batteries
Recharges Overnight - Cannot be Overcharged
The battery can be recharged overnight by plugging into any 110 Volt AC outlet. It can also be recharged from a running 12 Volt vehicle system by using an automobile recharging cable. The self-contained, solid-state recharging circuit is so designed that the battery can be recharged hundreds of times and cannot be overcharged. A 110 Volt AC charging adapter is included.
Specially Designed for Model 715 Pipe and Cable Locator and Models 825 and 830 Current Interrupters
Nilsson Electrical Laboratory, Inc. has developed the Model 110, 12 volt rechargeable battery pack for use with the Nilsson Model 825 and 830 Current Interrupters. The Model 110 can also be used with any equipment requiring a 12 Vold DC power source.
Fits in same Battery Clamp
The battery will clamp directly in either the Model 715 Pipe and Cable Locator or the Models 825 and 830 Current Interrupters in the same space as the 12 Volt lantern battery normally supplied.
Gelled Electrolyte Provides Higher Current Capacity
Using the latest developments in rechargeable batteries, the Model 110 employs a gelled electrolyte in a sealed battery, providing much higher current capacity than other rechargeable batteries. The Model 110 can be used over a wide operating temperature range under rugged field conditions.
Specifications:
 
Battery voltage
12 Volts DC
Supply voltage
115 Volts AC
Charge capacity
7.0 ampere-hours
Dimensions
6.25" x 5.75"x 2.75"
Weight                          
6 lbs
Power cord
Included
 



泰亚赛福作为众多知名品牌的合作伙伴，以最优的价格+完善的售后服务体系向您提供产品。“服务第一、质量第一、价格最低”！

品牌简介

美国MI美国MI
品牌详情>>

您最近浏览的商品