CMCP-570A Solid State Temperature Monitor温湿度监控器.

The CMCP570 Solid State Temperature Monitor is compatable with Accelerometers with internal solid state temperature sensing elements such as the 793T and 797T. It is available in English or Metric scaling. The CMCP565 provides constant current power, checks for faults, processes the temperature signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a range of 0 to 250° F (-17.8 to 121°C). Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.

 

On board fault detection circuitry continuously monitors the transducer for normal operation. If a fault occurs, the output current is reduced to <2 mA to indicate the fault to the readout system. A green LED on the front of the unit is turned off to provide a local indication of the fault.

 

Electrical Specifications:
1．Input: Accelerometers with Solid State Temperature. (793T and 797T)
2．Power: +24 Vdc @ 45 mA max. (30 mA typical).
3．Protection: Reverse polarity and transient protection included.
4．Accuracy: 0.5 % of Full Scale Range.
5．Output: 4-20 mA proportional to the full scale range.
6．Maximum Load: 600 Ohms Resistive.
7．Constant Current Source: 4 mA CCD
8．Case: Isolated.
9．Range: English, 0 to 250° F.
           Metric, 0 to 120° C.
10．Fault Indication: Green LED and 4-20 mA < 2mA

 

Relay Module:
1．Alarms: OK, Alert and Danger
2．Alarm Setpoints: Alert and Danger Adjustable 0 to 110% FS.
3．Trip Multiply: 2X or 3X on Contact Closure.
4．Alarm Relays: OK, Alert and Danger.
                     Form C, SPDT, 5A @ 30 VDC or 250 VAC.
                     Latching or Non-latching, Selectable.
5．Time Delay: 0.1, 1, 3, 6 or 10 Seconds, Selectable.
6．Alarm LED's: Alert = Yellow, Danger = Red.
7．Display Outputs: 0-5 VDC for Current Value, Alert Setpoint and Danger Setpoint.

 

Environmental Specifications:
1．Operating Temp.: -20°C to +80° C (-4° F to +176° F).
2．Storage Temp.: -55°C to +125° C (-67° F to +257° F).
3．Relative Humidity: 0 - 95% Non-Condensing.

4．Physical:
5．Mounting: 32 mm (G style) or 35 mm (T style) DIN Rail.
6．Size: 1" Wide x 3.11" High x 3.95" Deep