产品描述:
Thyristor units are used in all applications where larger resistive and inductive loads haveto be switched, for example in industrial furnaces and in plastics processing. The thyristorunit consists of two thyristors connected in inverse parallel, the isolated heat sink and thecontrol electronics. Thyristor units up to 50A load current can either be snapped onto a35 mm rail or wall-mounted using a mounting plate. Units from 75A load current can onlybe wall-mounted. Depending on the settings of the internal switches, the thyristor unitsoperate either in phase-angle mode with adjustable current limiting, or in burst-firingmode. In burst-firing operation, the start of the first half-wave can be partly cut back topermit operation on transformer loads. A subsidiary control, which can be selected as U2,P or I2, ensures that fluctuations in the supply voltage do not affect the control loop duringthe process. The control range can be restricted by attenuating the input signal, and abase load can be set using an external potentiometer. An economy circuit can be used onmulti-phase loads in burst-firing operation. In phase-angle operation, the phase angle setby the controller is approached slowly, starting from 180 degrees, in order to avoid highinrush currents (soft start). The thyristor units conform to VDE 0160 5.5.1.3 (5/88) and VDE0106 Part 100 (3/83). The unit has to be grounded in accordance with the requirements of the local power supply authority.
购买流程:
①购买产品:点击“生成订单”→填写产品数量、联系方式并提交→会员顾问订单处理→合同签订。
②咨询产品:请联系会员顾问或致电会员客服电话。
③如果您还不是我们的会员,请先注册。
④最小起订数量:1
注意:本产品唯一个人现金委托收款人,如汇入其它个人账户本公司不承担任何责任
维护担当:
上线时间:
投诉电话:13801126385 13911302309
泰亚赛福作为众多知名品牌的合作伙伴,以最优的价格+完善的售后服务体系向您提供产品。“服务第一、质量第一、价格最低”!