The RKI S-Series gas sensor/transmitters are highly reliable and cost effective basic 4-20 mA transmitters for the detection of common gas hazards. The S-Series transmitters are available for LEL (catalytic), LEL (IR) CH4, LEL (IR) HC, O2, H2S, CO, or CO2 (IR). The electronics are encased inside a potted package to avoid damage from mechanical abuse or corrosion, and this assembly is installed inside an explosion-proof enclosure. All sensors are explosion-proof with flame arrestors and approved for use in hazardous atmospheres. There is also an optional version for oxygen for use in non-hazardous atmospheres.

The only tools required to calibrate the S-Series are a voltmeter, screwdriver, and cal gas. The zero and calibration functions are performed by adjusting potentiometers on the amplifiers. The amplifier has test jacks for connecting to a voltmeter for calibration purposes, and the sensor response is viewed on the voltmeter as a 100 mV to 500 mV signal. Field calibration can be performed easily and quickly by one person.

The S-Series transmitters can be used either indoors or outdoors. The flame arrestors utilize a patented coating which make them water repellent, and splash guards are also available for use in very wet environments.

The transmitter operates from 24 VDC (11VDC to 30 VDC), and provides a 4-20mA signal which can be connected to a wide variety of controllers.

Features

Explosion proof housing

Patented water repellent sensor coating

Available for LEL, H2S, CO, O2 , and ppm HC

IR sensors available for LEL & CO2

Long life sensors (2 + years typical)

Competitively priced

UL or CSA classified (most versions)

Applications

Petrochemical Plants

Refineries

Gas Plants

Offshore Drilling Platforms

Water & wastewater treatment plants

Pulp & paper mills

Gas, telephone, & electric utilities

Parking garages

Manufacturing facilities

Steel

Automotive

Chemical storage buildings