Microtector II G460

Infrared and PID sensors provide safety

7-Gas detector
This light and robust gas detector is the development of the proven Microtector II G450. The key features are retained – smart, interchangeable sensor technology, low cost of ownership - but extra functionality is now added.

The Microtector II G460 measures up to 7 gases simultaneously in ambient air for increased workplace safety. The sensor slots can be equipped individually. Different detection principles are available for optimal measuring results.

Measurable gases
The most common sensors detect  O2, H2S, CO, CO2 and combustible gases. Additional sensors are available for NH3, HCl, PH3, HCN, NO, NO2, SO2 and a variety of other gases.

CO2 – reliable infrared measurement
For increasing the user’s safety, the Microtector II G460 detects carbon dioxide by means of a selective infrared sensor (NDIR). This sensor provides long-term stable detection values. Unlike electrochemical sensors, IR technology is not subject to cross sensitivity from toxic hydrogen sulphide.

The Microtector II G460 is the smallest detector world-wide which can be equipped with both an infrared sensor and a PID.

Monitoring for toxic volatile organic compounds (VOC)
Photoionization detector (PID) equipped instruments are increasingly viewed as the best choice for measurement of VOCs at exposure limit concentrations.  Familiar substances containing VOCs include solvents, paint thinner and nail polish remover, as well as the vapors associated with fuels such as gasoline, diesel, heating oil, kerosene and jet fuel. The category also includes many specific toxic substances such as benzene, butadiene, hexane, toluene, xylene, and many others.  Most VOC vapors are flammable at surprisingly low concentrations.  For most VOCs, however, the toxic exposure limit is exceeded long before readings reach a concentration high enough to trigger a combustible range alarm. 

Additional functions of the Microtector II G460

IR-Sensor (CO2) for long-term stable detection values

Poison resistant CO2 sensor

PID for monitoring toxic volatile organic compounds (VOC)

Smart senso technology for adaption and easy replacement

Datalogger (optional)
The loop data logger records gas concentrations and alarms over a period ofup to 50 hours. This data can be transferred to a PC to be displayed and evaluated. The data logger has a storage capacity of 1800 measuring points per gas. Storing intervals and mode (average, peak, instantaneous values) are programmable individually.

Attachable motorized pump (optional)
Inaccessible areas, like tanks and containers, can contain lethal gas mixtures. With the G400-MP1 an attachable high-performance pump is available that can sample the gas from up to 100 metres away.
The pump and tube is attached easily and has its own power supply does not affect the operational time of the  instrument. Either a rechargeable NiMH battery pack or alkaline batteries are available.

Power supply options
Power supply is provided by either a rechargeable NiMH battery pack or Alkaline batteries. Depending on alarm frequency and alarm duration the operational time is up to 30 hours. A NiMH battery pack with Ex-proof LEDs allow a built-in torch option. The NiMH batteries can be fully recharged in less than 4 hours with the drop-in charger. Additional charging options are smart charger cap, dockingstation or vehicle charger.

Carrying possibilities (optional)
The light detector can be securely fastened at the user’s clothing with a durable crocodile clip. A belt clip is also available. The reversible display allows easy reading by the user.

Comprehensive accessories
Various options allow individual adaptation to personal requirements. A number of accessories make the Microtector II G460 a complete, useful instrument in everyday work with combustible and toxic gases.