首页 > 气体检测 >  气体检测仪 > 单一气体检测仪 > 氧气检测仪(O2) > 萃取氧气分析仪
萃取氧气分析仪
萃取氧气分析仪
订货号: MM-40585-00
产地: 意大利
品牌:
开发编号: N
市场价:
*此产品根据配置不同价格不同
*此价格为参考价格,具体价格以订单合同为准
    我在现场:
    产品视频:
  • 销售工程师 褚经理
    010-84851836-840
    13641148947
    QQ:2355835521
  • 销售工程师 高经理
    021-54248686-211
    17721451936
    QQ:2355835546
  • 1
  • 2
  • 产品描述
  • 技术参数
  • 技术文档
  • 相关产品
  • 明细价格
  • 购买流程
产品描述:

The analyzer is based on a fully stabilized zirconia element which is heated by an armored electric heater at the working temperature. The electronic converter, microprocessor based, drive a panel led display, the analog output, the alarms and the optional printer. The membrane pump and a flow meter with  niddle valve drive and regulate the flow of the sample to the measuring element.
 
Special attention has been put to insulate the high temperature that is present on the zirconia cell. A fan and a thermostat that cut the power if the inside temperature would rise too high, guarantee the safe running of the equipment
 
The hole equipment is housed in a strong water proof enclosure with glass window.
The very wide measuring range is the ideal for oxygen measuring in protection atmospheres, laboratory use and for any gas streams.
 
OPTION
 Panel 24 columns normal paper printer. Printing time selectable fro 1 to 10 min, step 1 min.
 
TECHNICAL SPECIFICATIONS
Measuring field
0 ppm – 25% O2 (volume)
Accuracy
±  1% FS in the field 0 – 25%
±   0.5% FS in the field 0 – 2000 ppm
Response time
< 30 sec 90%
Repeatability
within 1%
Analog output
isolated, linear on four ranges, field selectable
0.0 – 5%
0.0– 10%
0.0 - 25 %
0.0 -  1999  ppm
Alarms
oxygen high and low
Status alarm
Flow
0.5 – 1  l/min
Room Temperature
-10 /  40°C
Dimensions
mm. 400X500X250


品牌简介

意大利FER高温氧化锆分析仪针对高温烟气(500-1600℃)氧含量分析而设计,它能确保快速的响应和高精度的氧含量输出。特殊的氧化锆探头设计及精度补偿功能使零点和量程的漂移…意大利FER高温氧化锆分析仪针对高温烟气(500-1600℃)氧含量分析而设计,它能确保快速的响应和高精度的氧含量输出。特殊的氧化锆探头设计及精度补偿功能使零点和量程的漂移量极低,年漂移量不超过0.1%。陶瓷探头可以使用于大多数腐蚀性的气体,尤其适合于工业废气处理,氟化物处理,玻璃工业,脱硫、脱硝处理等工业测氧领域。

您最近浏览的商品

美国泰亚赛褔