您好,欢迎来到泰亚赛福!收藏泰亚赛福
订货号: | MM-02093-00 |
产地: | 美国 |
品牌: | |
开发编号: | N |
市场价: | ¥ |
*此产品根据配置不同价格不同 |
*此价格为参考价格,具体价格以订单合同为准 |
Key Features Recently Added to the Dash 8XPM | |
EN50160 Reporting: EN50160 is a European standard that defines the main characteristics of voltage at the customer’s supply terminals. This feature allows the user to make power monitoring recordings with pre-defined set-up defined by EN 50160 and report them using AstroPower Review. |
Flicker Meter Reporting: Flicker is a term used to describe a random or continuous voltage fluctuations no more than 10% lower or higher than the normal voltage waveform. This feature allows the user to record and monitor short and long term flicker measurements as defined by International (IEC 61000-4-15) and European (EN 50160) electrical standards. |
AstroPower Review ITIC Plot Reporting: The ITIC (Information Technology Industry Council) plot describes a 120V/60HZ AC input voltage envelope, which typically can be tolerated by most Information Technology Equipment. This feature allows the user to generate an ITIC plot report with D8XPM data using AstroPower Review. |
Consumption Analysis Tab: Absolute, Active and Reactive energy are now reported in real-time.Time Start “Trigger” Feature: This convenient feature allows the user to set a specific start recording time and recording length. |
Snapshot Event Zoom: The user can now zoom in to critical portions of transient events by adjusting the time and phase leg voltage/current parameters. |
Improved Interface: This upgrade provides larger icons and an improved touch screen interface for easy setup, recording and review of critical power monitoring data. |
Signal Modules | |
Maximum modules |
8 per unit |
Supported modules |
IHV1, IHV2 |
Channels |
3 voltage, 3 current |
Auxiliary channels |
Modules 7 and 8 |
Scaling |
Yes, using VT or CT ratios |
IHV1 Module | |
Maximum voltage |
250Vrms CAT II |
Bandwidth |
39 kHz |
Input impedance |
>1 M Ohm |
IHV2 Module | |
Maximum voltage |
600Vrms CAT II, 300Vrms CAT III |
Bandwidth |
34 kHz |
Input impedance |
4 M Ohm (differential) |
Continuous Recording | |
Recording method |
Internal disk drive |
Sample rate |
6,250 samples per second per channel in Continuous Mode |
Drive capacity |
73 GB |
Recording time |
up to 88 hours in Continuous Mode (dependent on free disk space) |
Color Display | |
Display |
Full screen waveform or split screen w/analysis |
Waveform display |
Voltage/current or phase groups |
Analysis display |
Up to 10 tabbed screens of analysis |
Viewing area |
15” diagonal |
Resolution |
XGA (1024 x 768) |
Touch screen |
Full-screen, resistive |
Recorder Mode | |
Analysis |
Real-time calculations |
Continuous recording |
All waveforms with one-button start/stop |
Event logging |
Simultaneous with continuous waveform recording |
Review Mode | |
Analysis |
Post-capture calculations |
Derived channels |
Graphic plots of trend data. Includes Vrms, Irms, apparent power, real power, reactive power, power factor, frequency, voltage THD, current THD, voltage unbalance and current unbalance |
Event scan |
Reconfigure event criteria and scan through captured data |
Transient Mode | |
Sample rate |
200,000 samples per second per channel in Transient Mode |
Event Logging |
Yes |
Logged Event Types | |
Voltage |
Interrupt, sag, swell, transient, frequency, total harmonic distortion, individual harmonic, individual interharmonic, unbalance |
Current |
Transient, RMS thresholds, total harmonic distortion, individual harmonic, individual interharmonic, unbalance |
Power |
Power factor, absolute power, active power, reactive power, leading/lagging |
Analysis Functions | |
Harmonics / Interharmonics |
Graphical display for any phase (voltage or current); total harmonic distortion percentage |
Phase diagrams |
Vector diagrams for voltage and current |
RMS values |
Calculated for all phases, voltage and current |
Power values |
Absolute power (kVA), active power (kW), reactive power (kVAR) and power factor |
Sequential components |
Positive, negative, and zero sequence; voltage or current; percentage unbalanced |
Power | |
Input Voltage Range |
100 to 250 VAC |
Frequency Range |
47 Hz to 63 Hz |
Power Factor |
0.99 |
Power Consumption |
150 W maximum (<100 W typical) |
Physical | |
Enclosure |
Aluminum |
Dimensions |
12.6” H x 16.7” W x 4.5” T (without feet) |
Weight |
20 lbs (with 8 modules) |
Environmental | |
Operating Temp |
5 to 40 °C ( 40 to 105 °F ) |
Operating Humidity |
10% to 90% non condensing |
定货号 | 产品名称 | 规格配置 / 简介 | 市场价/(会员价) |
---|---|---|---|
MM-02093-00 | Dash® 8XPM数据采集器 | /() |