Model: ATGC-1Advanced Tracer， ATGC-1高级示踪器

 

The Amprobe ATGC-1 ground coil is an accessory to any Amprobe AT-2000 or AT-4000 wire tracer. The ATGC-1 Ground Coil allows the signal from the Transmitter in the Advanced Tracer AT-2000 series or AT-4000 series to be induced onto buried conductors, water pipes and gas pipes up to 2 m deep. The coil is placed on the ground, above and to the side of the conductor to be traced. This allows tracing of conductors up to 100 m in length. Using the Wire Tracer’s receiver, an underground cable can be located and traced. The optional accessory for the wire tracer, Battery Booster B-2024 can be used to ensure a maximum transfer of the signal.

 

 

 

Traces and locates buried conductors like Highway Lighting Conductors, Main Electrical Feeds, Water Mains, and Telephone Lines

Eliminates direct connection of transmitter

No access to the conductor required

Works with any AT-4000 or AT-2000 models

 

 

The Amprobe ATGC-1 ground coil is an accessory to any Amprobe AT-2000 or AT-4000 wire tracer. The ATGC-1 Ground Coil allows the signal from the Transmitter in the Advanced Tracer AT-2000 series or AT-4000 series to be induced onto buried conductors, water pipes and gas pipes up to 2 m deep. The coil is placed on the ground, above and to the side of the conductor to be traced. This allows tracing of conductors up to 100 m in length. Using the Wire Tracer’s receiver, an underground cable can be located and traced. The optional accessory for the wire tracer, Battery Booster B-2024 can be used to ensure a maximum transfer of the signal.

 

 

 

Traces and locates buried conductors like Highway Lighting Conductors, Main Electrical Feeds, Water Mains, and Telephone Lines

Eliminates direct connection of transmitter

No access to the conductor required

Works with any AT-4000 or AT-2000 models