Measurements

Measured Parameters

L (Inductance), C (Capacitance), R ( Resistance), Z (Impedance), X (Reactance), Q (Quality factor), D (Dissipation factor), Θ (Phase angle in degrees or Radians);
  The following Parameters are monitored only, no values for the parameters may be entered: G (Conductance) B (Susceptance), Y (Admittance), Vac ( Test signal voltage) and Iac (test signal current))

Resistance/Reactance

Measured Parameter

R + Q, R + X

Measurement

RX: 0.0001Ω to 9999.9MΩ
  Q: 0.0001 to 9999.9

Impedance

Measured Parameter

Z+Θ ( Phase angle in Degrees or radians)

Measurement range

Z: 0.0001Ω to 9999.9MΩ
Θ? : -179.99? to 179.99?
Θr: -3.1416 to 3.1416

Inductance

Measured parameter

L + Q, L + R

Measurement range

L: 0.0001nH to 9999.9H
Q: 0.0001 to 9999.9
R: 0.0001Ω to 9999.9MΩ

Capacitance

Measured parmeter

C+R, C+D

Measurement range

C: 0.0001pF to 9999.9mF
D: 0.0001 to 9999.9
R: 0.0001Ω to 9999.9MΩ

G,B and Y ( Displayed only)

Measurement range

G, B, Y: 0.00001nS to 999.999S

Test Environment

Test Voltages

0.1V, 0.3V, 1.0V

Test Voltage Accuracy

±(10% + 10mV)

Test Frequencies

50Hz, 60Hz, 100Hz, 120Hz, 1KHz, 10KHz, 20KHz, 50KHz, 100KHz

Test Frequency Accuracy

± 0.02%

Measurement Rates

Slow:     1.5 Measurements/Sec
Medium1: 5 Measments/Sec
Medium2: 10 Measurements/Sec
Fast:      30 Measurements/Sec

Ranging

Types

Auto, Hold and Nominal
Nominal ranging the Z9500 selects the best range according to the nominal value being measured

Measurement Circuit configurations

Series and Parallel

Output Impedances

30Ω, 50Ω, 100Ω

Trigger

Modes

Internal, External, Manual, Bus

Display

Display Type

3.5" TFT Multi line Color LCD with Back light

Displayed Values:

5 Digit multi line display of L,C,R or Z measurements
and Q,D or Θ
Mon1 and Mon2: Displays Y, B, G, Iac, Vac, L, R. Z,D, Θ or Q (Mon1 and Mon2 are displayed simultaneously on the LCD as separate lines)

Parameters Displayed

Measrements are displayed as: Absolute value, ? absolute , ? %

Meaurement Accuracy

Basic Accuracy

± 0.05% (see manual for accuracy conditions)

Input Compensation

Short and open circuit cand Load ompensation

Component sorting (comparator function)

Sorting types

Binning: Components are sorted in to 5 Bins , Bins 1-3, Aux and out of tolerance according to preset tolerances and Hi/Lo limit testing

Remote Operation

Interfaces

RS232, Handler and USB (RS232 to USB convertor)
RS232 commands are SCPI compliant
Optional front panel USB host port.

Storage

10 component setups may be stored and recalled from internal memory.
Additiional setups and data may be stored in a flash RAM connected to the optional Front panel USB host port

General Specifications

Power requirements

120V AC 50/60Hz.. 220V AC operation upon request at time of purchase

Power consumption

Approximately 25 watts

Operating temperature

32°F to 155°F (0°C to 55°C)

Calibration temperature

73°F ± 9°F (23°C ± 5°)

Operating Humidity

15% to 85% at a wet bulb temperature of =104°F (40°C)

Dimensions

10.4" (W) x 4.21" (H) x 13.8" (D)
264mm x 107mm x 350mm

Weight

5.84lbs (2.64 Kg)

Accessories

Operator's manual, Test leads with Kelvin clips, Radial lead test adapter, Shorting bar AC line cord, RS232 cable, USB cable, USB to RS232 adapter and USB driver software.