AC/DC Current clamp The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001. Current Range: 0.1 to 100A DC or 0.1 to 70A AC Basic Accuracy (DC to 1kHz): 100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA 10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA 40A to 80A +/- 12% of reading + 50mA 80 to 100A +/- 15% of reading Output Signal: 10A range: 100mV/A | 100A range: 10mV/A Bandwidth: 1Hz to 20kHz Working Voltage: 600V AC rms Maximum Conductor Size: 11.8 mm (.46 inch) diameter Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V

AC/DC交、直流两用电流钳，额定AC电流量程为0~10A，0~1000A，连续AC电流量程为0.1~100A。

	80i-110s	i410	i1010
测量原理		霍尔效应	霍尔效应
额定AC电流量程	0~10A，0~1000A	1~400A	1~600A
连续AC电流量程	0.1~100A	1~400A	1~600A
最低AC电流		0.5A	0.5A
最高AC电流	140A峰值	400A	600A
准确度	0.05~100A, DC~5kHz: 3%读数 0.05~100A, 5kHz~20kHz; 12%读数	3.5%读数+0.5A	2%读数+0.5A
频率范围	DC~100kHz	3kHz(-3dB响应）	10kHz(-3dB响应）
量程		1~400A	1~1000A
准确度		3.5%读数+0.5A	2%读数+0.5A
调零	有	有	有
工作电压	600V	600V	600V
共模电压	600V	600V	42VDC或30VAC
最大导体直径	11.8mm	33mm	33mm
最大导体尺寸		75MCM或2×500MCM	750MCM或2×500MCM
输出电平	10mV/A, 100mV/A	1mV/A	1mV/A
连接电缆	1.6米长，BNC口	屏蔽香蕉口	屏蔽香蕉口
电气噪声抑制		好	好
电池寿命		小时	小时
保修期	1年