主要用途与特点：

YD系列油浸式高压试验变压器，是供输配电设备、绝缘工具、绝缘材料及各种产品检测绝缘强度试验的主要设备。产品结构紧凑，通用性强，使用方便，性能稳定,特别方便用户在现场检测各种电器设备的绝缘性能。有交流、交直流、交流串激三种类型。

YD SERIES OF HV TESTING TRANSFORMER

I. Introduction of Product

Transformer for high voltage test produced by our company is the main equipment of insulation strength test for various kinds of products such as power supply unit, switch gear, insulation tools and materials etc.

 

This series of products is of compact structure and good versatility. It is convenient to use this series of products and is especially suitable for on-site check of insulation performance of various kinds of electric equipments.

II. Characteristics of Product

The iron core of this series of products is of single phase. As for fastening method, epoxy plate or steel material will be used as clamping piece and the traditional core-through bolt is stopped to use. The coil is of concentric cylinder multi-layer tower type. Low voltage coil is on inner side and high voltage coil is on outer side. Meter coil is the 100V tap of high voltage end.

 

The design of transformer cover is suitable for the structure of cassette mechanism. High voltage silicon rectifier stack in the testing transformer (for both alternating current and direct current) is sealed within the high voltage tube with special process.

 

 

技术参数：

单台输出电压：0～300KV；单台输出电容：1～600KVA；电源：AC 220V或380V。

Main Technical Parameter

Measuring Voltage: 100V or 200V

Capacity: 15；20；25；50KVAand so on    Subject to routine test report.