For use on materials with critical tension ranges up to 500 lbs.

Large, easy to read, graphic display with adjustable backlighting and contrast.

Select tension values to indicate in Lbs, Kg or Newtons.

Display shows Tension, Battery Charge level and Material selected.

Push a button to activate the Memory Function to store and display up to five separate tension readings plus the average value (AVG) of these stored readings.

Accuracy is +/- 2% full-scale for all menu-selectable calibrations. Accuracy for custom calibrations is material specific. • Up to 10 calibrations can be programmed into instrument. (All calibrations are password protected to provide due diligence against unauthorized changes).

Adjustable LCD refresh rates allow for stable digital readings.

All models typically available from stock.

All models factory calibrated and ready for use.

All calibration values traceable to National Standards.

Calibration certificate included.

MODEL	RANGE	RESOLUTION
LXR-250	5-250 LB     1” Tape Roller	0.5 LB
LXR-500	25-500 LB     1” Tape Roller	1 LB

 

AVAILABLE OPTIONS FOR ALL INSTRUMENTS

Note:  Add option designator to the end of the part number.  (i.e.: a Model LX-250-E denotes a standard, LX-250 with the optional RS-232, serial output function installed).

-A      Analog Output option.  0-5 VDC or 4-20mA with Software-definable ending sequences.  Provided with 10’ of cable.  Data outputted at 40 Hz.

-E      RS-233 Serial Output option.  Provided with 10’ cable to Interface with your receiving device.  Select data sampling rate from 1, 2 or 5 Hz.

Input Real-Time Serial Data into any Windows® application using the optional software WinWedge Pro® for Windows, or configure your Window’s® operating system to capture the data via Hyper Terminal®.

SPECIFICATIONS:

Approximate weight is 1-1/2 lb  (Weight varies depending upon instrument configuration).

Re-chargeable NIMH battery with power supply provided.  Recommended temperature range for instruments is 35 - 115° F.   Approximately 6 hours of operation per battery charge depending upon backlighting intensity.

Power Supply operates with input voltages from 100 – 240V and includes several, interchangeable “blades” allowing use with European, US, Australian and other plug configurations.

Automatic shutoff after 10 minutes of non-use.

Instruments may be operated continuously while connected to power supply.

Durable, lightweight carrying case with protective foam inserts.

CE Certification complying with heavy, industrial immunity standards.