TI-MINIMAX-C螺栓张力计-泰亚赛福-工业设备集采平台

您好，欢迎来到泰亚赛福！

收藏泰亚赛福

热门搜索：溶氧仪四合一气体检测仪硬度计测厚仪测温仪

综合产品分类

首页 > 材料分析设备 > 测力计 > 张力计 > TI-MINIMAX-C螺栓张力计

TI-MINIMAX-C螺栓张力计

订货号：	MM-11439-00
产地：	美国
品牌：
开发编号：	N
市场价：	￥

*此产品根据配置不同价格不同

*此价格为参考价格，具体价格以订单合同为准

我在现场：

产品视频：

工业检测设备

材料分析设备

测力计

产品描述
技术参数
技术文档
相关产品
明细价格
购买流程

产品描述：

The TI-MINIMAX can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length. The measurement is achieved by determining the change in the transit time, of an ultrasonic shock wave along the length of the fastener as the fastener is tightened by any method. The on-board microcomputer automatically interprets this time measurement to display the time(nanoseconds), elongation, load, stress, or %strain from stretching a fastener.

The first cost effective ultrasonic solution available on the market.

Visually compare the unloaded to the loaded waveform.

Display Options - RF, Rectified, Large Digits with Limits Bar.

Effectively monitor your bolts during periodic shutdowns over the service life of the fastener.

Measurement quanities - Time (nanoseconds), Elongation, Load, Stress, and %Strain.

Display Resolution - 1/8" VGA 240 x 160 pixels.

Stores 8000 readings and waveforms in multiple groups.

Built-in Linear regression or vector for optimizing load measurements.

The Auto Set feature automatically optimizes detection and adjusts display.

Hi/Lo alarm tolerance limits work in conjunction with the data port and external pump shut-off device.

技术参数：

Measuring Range	From 1” to 48” (25.4mm to 122cm) bolts
Time	Nanoseconds
Elongation	Change in length (inches/millimeters)
Load	Force load applied (pounds kIP or kN Killonewtons)
Stress	Force for unit area stress applied (pounds kPSI or megapascals MPa)
Strain %	percentage strain applied (inches per inch or millimeters per millimeter)
Resolution	+/- .00001 inches (0.0001 mm)
Velocity Range	.0492 to .3936 in/ms 1250 to 9999 meters/sec
Calibration	Fixed, Single, and Two point zero calibration options. Select bolt material types from a preset or custom list.
Units	English & Metric / Fahrenheit & Centigrade
Measuring Modes	Pulse-Echo (standard) Pulse-Echo w/Gate (fine adjust)
Pulser	Square wave pulser with adjustable pulse width (spike, thin, wide)
Receiver	Manual or Auto Set gain control with 40dB range
Timing	10 bit 250 MHz digitizer
Display Modes	A-Scan - Rectified +/- (half wave view), or RF (full waveform view)
Alarm Limits	Set hi and lo tolerances with audible beeper, viewable scan bar, and visual LEDs
Data Logger (Internal)	Total of 8,000 readings, multiple bolt groups. Stores both waveform views, nanoseconds, elongation, load, stress, and strain for each reading
Memory	16 megabit non-volatile ram
Transducer	Single Element (1 to 10 MHz & 1/8” to 1” diameters)
Transducer Cable Lenght	10 foot (custom lengths available, inquire)
Temperature Probe	for automatic temperature compensation
Setup Memory	64 custom user defined setups. Factory setups can also be edited by the user
Gate	Gate used to fine adjust where the detection point occurs
Auto Set	Locates the detection signal, optimizes the gain setting, and adjusts the overall display to show the waveform and detection point automatically
Field Calibration	Vector & linear regression. Includes Factory calibration traceable to national standards
Power	Three 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
Dimensions	Width (2.5in/63.5 mm) Height (6.5 in/165 mm) Depth (1.24 in/31.5 mm)
Weight	13.5 ounces (with batteries)
Operating Temperature	14 to 140F (-10C to 60C)

泰亚赛福作为众多知名品牌的合作伙伴，优惠的价格+完善的售后服务体系向您提供产品。font>

技术文档：

在线浏览：
文档下载：

泰亚赛福作为众多知名品牌的合作伙伴，优惠的价格+完善的售后服务体系向您提供产品。font>

相关产品：

泰亚赛福作为众多知名品牌的合作伙伴，优惠的价格+完善的售后服务体系向您提供产品。font>

明细价格：

定货号	产品名称	规格配置 / 简介	市场价/(会员价)
MM-11439-00	TI-MINIMAX-C螺栓张力计		/()

泰亚赛福作为众多知名品牌的合作伙伴，优惠的价格+完善的售后服务体系向您提供产品。font>

购买流程：

①购买产品：点击“生成订单”→填写产品数量、联系方式并提交→会员顾问订单处理→合同签订。
②咨询产品：请联系会员顾问或致电会员客服电话。
③如果您还不是我们的会员，请先注册。
④最小起订数量：1
注意：本产品唯一个人现金委托收款人，如汇入其它个人账户本公司不承担任何责任

维护担当：
上线时间：
投诉电话：13801126385 13911302309

联系方式

电话北京：400-000-1836 分机819 或拨0转总机
上海：021-54248686 分机或拨0转总机

传真北京：010-84852750/84854139
上海：021-64418200

泰亚赛福作为众多知名品牌的合作伙伴，优惠的价格+完善的售后服务体系向您提供产品。font>

品牌简介

美国测可赖

美国ELECTROMATIC有限公司成立于1958年，致力于为工业测量应用提供高性价比的解决方案。ELECTROMATIC公司的测可赖（CHECK LINE）仪器被广泛应用在世界各地，性能在业界处于领…美国ELECTROMATIC有限公司成立于1958年，致力于为工业测量应用提供高性价比的解决方案。ELECTROMATIC公司的测可赖（CHECK LINE）仪器被广泛应用在世界各地，性能在业界处于领先地位，被广泛用于车、能源、铁路等行业。我公司为CHECK LINE的中国北方销售平台，为CHECK LINE产品提供了良好的平台，以信得过的质量和优质的服务在业界称道。凭借价格低，质量好，到货快而多年来一直深受客户的好评。我们拥有完善的销售和服务网络，在全国拥有多家分公司和战略合作伙伴，欢迎前来选购！

品牌详情>>