ACM-200张力计

STANDARD FEATURES OF ALL MODELS

Easy one-hand operation

No interchangeable parts are needed to adapt to different cable sizes

Memory Lock Pointer holds readings until cleared

Calibration chart affixed to back of meter

Durable and made of non-corrosive materials

Weigh approximately 21 oz.

Compact design allows engagement of meter onto cables closely routed along floors, flat surfaces and other minimum clearanceareas.

FIVE MODELS / FIVE RANGES

DURABLE ~ ACCURATE ~ RELIABLE

 

All models meet or exceed military and civilian specifications for use on aircraft.

Models ACM-100, ACM-200, ACM-300 & CWT-150 are compact, allowing access in panels only 4" in diameter.

Model ACM-600 can be used through limited access areas as small as 5.3" in diameter.

All models are typically available from inventory.

All models are calibrated, certified and ready for use when shipped.

SIX MODELS AVAILABLE

ACM-200
The model ACM-200 seems to be our most popular model because of the versatility in range and cable diameters covered. The ACM-200 is designed to measure 20-200 lbs tension in 1/16", 3/32", 1/8", 5/32", 3/16", and 1/4" diameter aircraft cables. This instrument has a full scale accuracy of 4% for all cable sizes.

ACM-100
The model ACM-100 is designed to measure from 5-100 lbs tension in 1/16", 3/32", 1/8", 5/32" diameter cables. This instrument has a full scale accuracy of 4% for all cable sizes.

ACM-300
The model ACM-300 is designed to measure from 40-300 lbs tension in 3/32", 1/8", 3/16" and 1/4" diameter standard cables. This instrument has a full scale accuracy of 6% for all cable sizes. Can be used in limited access panels as small as 4" in diameter.

ACM-400
The model ACM-400 is designed to measure from 40-400 lbs tension in 3/32", 1/8", 5/32" and 3/16" diameter standard cables. This instrument has a full scale accuracy of 6% for all cable sizes. Can be used in limited access panels as small as 4" in diameter.

ACM-600
Our model ACM-600 measures tension from 40-600 lbs in 1/8", 5/32", 3/16", and 1/4" diameter aircraft cables. This instrument has a full scale accuracy of 8% or better. The ACM-600 closely resembles the ACM-200 with the exception of the instrument width, which is 5.2".

CWT-150
Our model CWT-150 measures tension from 10-150 lb in CWT 5, 10, 15, 20, & 25 diameter cables utilizing no interchangeable risers. This instrument has a full scale accuracy of 4% for all cable diameters, and can be used in limited access panels as small as 4" in diameter. This instrument is specifically designed for use on CWT cables; it cannot be used on standard aircraft cables.

ANNUAL CALIBRATION OR REPAIR SERVICE

Tensitron will recalibrate all models at a very reasonable cost. When an instrument is received for a yearly recalibration and certification, it is completely dismantled. We clean, repair and replace any damaged parts. The instrument is then recalibrated in our NIST-certified lab and provided with all the necessary documentation.