TX系列数字张力计
添加时间：2010-3-12 编辑：C055 阅读：次
- 产品名称：TX系列数字张力计
- 产品定货号：MC-01568-00
Select tension values to display in Grams, lbs, Newtons, or cN.
Instruments come with calibrations for numerous wire and filament sizes.
Up to 10 additional custom calibrations may be programmed into instrument. (All calibrations password protected).
Choose your calibration by first highlighting and selecting the material (either wires, filaments, or custom), then the units of measurement (inches, mm, AWG wire sizes, or custom). Lastly, select the material size or gauge number, and push "Enter". The instrument automatically adjusts to the calibration you've selected with a full-scale accuracy of +/- 1%. (Full-scale accuracy for custom sizes is material specific.)
Selectable LCD refresh rates allow for stable digital readings.
Re-chargeable NIMH batteries and power supply provided. Approximately 9 hours of operation per battery charge. Automatic shut-off after 10 minutes of non-use.
Instruments may be operated continuously while connected to power supply.
All instruments factory-calibrated and ready for use. Calibration certificate included. All calibration values traceable to National Standards.
All models are typically available from inventory.
RS-232 Serial interface (option). Select data sampling rate from 1, 2, or 5 Hz. Provided with 10' cable to interface with your receiving device.
Monitoring tension or speed through the ANALOG OUTPUT (option). Simply connect Analog Output Cable to receptacle located on the bottom of instrument and then connect the output cable leads to the analog input of your measurement or control device.
|
Minimum and Maximum Update Rates for speed or tension is adjustable. User-selectable dampening rate speeds up or slows down DRO updates.
|
|
EDM WIRE APPLICATIONS
Tensitron, Inc.'s association with the wire EDM industry, dates back to the original American prototypes for this technology. Specific EDM wire calibrations are entered into these meters to insure utmost accuracy for each wire type. Our TX-5EDM digital meters have selectable values that mimic the calibration protocol for the Wire EDM machine and therefore help to insure maximum accuracy of wire tension throughout its entire tension range.
As a general rule of thumb, the broad scale wire tension range (.004 - .012 dia. wire) for EDM machinery is approximately 200 -1800 g. We recommend our Model No. TX-5EDM that has Special Calibrations for .01 - .03 mm EDM wires; additional custom sizes can easily be added to the menu. All calibrated values are fully traceable to National Standards. Tensitron can typically ship immediately upon receipt of your order.
|
|
TAPE AND NARROW BELT APPLICATIONS
The TX-R series are digital tension meters outfitted with different contact elements than the standard v-groove rollers. The cylindrical, flanged, and scooped rollers are used to measure tension on narrow belts, ribbons, tapes, and flat materials where your critical tension ranges are below 5000 grams. Talk to one of Tensitron's application engineers to determine which contact elements will best serve your tension measuring requirements. |
泰亚赛福 —— 世界领先的检测仪器集成供应商 
您当前的位置：
加入对比
