MultiTox MOS气体检测仪

添加时间：2010-2-9 编辑：C055 阅读：次

加入购物车

加入对比

产品名称：MultiTox MOS气体检测仪
产品定货号：MR-06523-00

产地：其它
推荐：

This high-spec H2S detector uses a semiconductor sensor that overcomes most of the problems associated with this technology. The MultiTox DM-TT6 has higher reliability and lower maintenance. In other words: Increased safety and reduced cost.

Features

Performance

The MultiTox DM-TT6 detector has a thin layer semi-conductor-type sensor, resulting in fast response and high accuracy, as well as low interferences with other gases.
Environment compensation Modern electronics provides compensation for humidity and temperature changes.

1-year calibration interval

When other semiconductors on the market has to be exposed to gas every month to avoid the sensor to fall asleep, the Simtronics semiconductor sensor needs yearly calibration test only.

Easy maintenance

The interchangeable and removable cartridge make this detector particularly easy to maintain.

Remote control All controls, configurations and readouts are remotely accessible from the infrared remote controller.

An autonomous sensor

The digital processing linearises the measurement signal before transmitting it to a gas detection unit or plant automatic control system. Detectors have both analog and contact outputs.

Application

Offshore platforms, Refineries, Chemical industry

Specification
General
Technology	Solid-state Metal Oxide Semiconductor
Detects	Hydrogen Sulphide (H2S)
	others gas available on request
Range	0 - 50 ppm H2S
	0 - 100 ppm H2S
	0 - 200 ppm H2S
Performance
Response time	T50 < 30 s
	T90 < 120 s
Accuracy	+/- 10% of calibrated range
Sensor life	Better than 5 years
Output Signal
Standard	4-20mA, max. load impedance 700? (Std.)
	[600? with optional LCD display]
	2 x configurable Relays max 1A / 30V
option	0-22mA (Option for PLC?s)
option	Lonworks (Syntel)
Electrical
Power supply	24V DC, range (18 - 32V DC)
Power consumption	65 mA normal
Connection	0.3 mm2 (22 AWG) - 2.5 mm2 (12 AWG)
Environmental
Storage	-40°C to +70°C
Operation	-20°C to +60°C
Humidity	0 to 95% RH (non-condensing)cAtmospheric pressure +/- 10%
Ingress	IP66
RFI/EMI	Complies with EN50081-1, EN50081-2,
	EN50082-1 and EN50082-2.
Housing
Material	Epoxy coated aluminium (standard)
	316 L stainless steel (option)
Approvals
ATEX	ATEX II 2 G EEx d II C T6
Temperature range	-40°C to +65°C
Certificate number	LCIE03ATEX6262X
IECEx	IECEx LCI09.0018

产品名称	产品简介	产品编号
MultiTox MOS气体检测仪	This high-spec H2S detector uses a semiconductor sensor that overcomes most of the problems associated with this technology.	MR-06523-00