GD10L红外气体检测仪

添加时间：2010-2-9 编辑：C055 阅读：次

加入购物车

加入对比

产品名称：GD10L红外气体检测仪
产品定货号：MR-06510-00

产地：其它
推荐：

GD10L - IR open path Gas detector

The GD10L open path combustible gas detector offers reliable and safe performance even under harsh working conditions, utilising the proven, unique IR technology from our well-known GD10P point detector.

Features

Life-time stability

The SimSource infrared light source is a solid-state component with a stable output and 60years of expected lifteime. This, together with the Simtronics IR-path design gives you a detector with unparallelled stability.

Easy installation

As the detector has a combined transmitter and receiver, alignment and commisioning may be done by a single technichian.

Low maintenance costs

GD10L requires no regular field maintenance, apart from cleaning the optics. It has a fixed factory calibration, and is not recalibrated during its lifetime.

Application

FPSO

The rough environment on FPSOs with vibrations and movement, is a typical area where you need offshore quality on brackets and housings. GD10L has both.

Petrochemical and general industry

The easy handling and low maintenance makes the GD10L well suited for general section separation in industrial plants outdoor and indoor.

Specification
General
Detection method	IR-absorption, dual wavelength, dual path
IR-Source	Solid state IR source, 50Hz flash
Self-test	Continuous
Calibration	Factory set, no field recalibration
Performance
Detection range	5 LEL.m Methane Option: Other ranges
Path Length	2-20m or 2-30m (7-65 ft or 7-100 ft)
Long-term stability	Better than 0.2 LEL.m
Repeatability	Better than 0.1 LEL.m
Response time	T50 = 2.5 sec T90 = 5 sec.
Output Signal
Standard	Current source 4 - 20 mA, max. load
	impedance 500 Ohms
Option	Current sink 4 - 20 mA
Detector warnings:
Clean optics	1 mA
Sensor failure	0 mA
Electrical
Detector power supply	18-32 V DC
Power consumption	Approx. 5 W
Electrical connection	3 wires (M20 EExe cable gland)
Reflector heating	60 W (Max) 20m (65 feet) range (110/230VAC)
	120W (Max) 30m (100 feet) range
Environmental
Operating:	-0°C to +45°C (-4°F to +113°F)
Option:	-30°C to +60°C (-22°F to +140°F)
Humidity (operation)	99% RH non-condensing
Certification
ATEX certified	ATEX 2 II G EExde IIC T6
RFI/EMI protection	Complies with EN50081-1, EN50081-2,
	EN50082-1 and EN50082-2.
Mechanical
Protection category	IP66/IP67 DIN 40050 (NEMA 4X)
IP66/IP67 DIN 40050 (NEMA 4X)	Stainless steel SIS2343 (ASTM 316)