泰亚赛福 —— 世界领先的检测仪器集成供应商
努力为您创造价值
智能 编号 品牌
单一气体检测仪
产品导航
 您当前的位置:气体检测 >> 单一气体检测仪 >> 二氧化碳检测仪(CO2) >> CD-1300-ST二氧化碳传感器

CD-1300-ST二氧化碳传感器

添加时间:2009-11-2 编辑:C055 阅读:

  • 产品名称:CD-1300-ST二氧化碳传感器
  • 产品定货号:MR-01269-00
  • 产地:美国
  • 推荐:
The CD-1300-ST Sensor/Transmitter is easy to install and maintain. The output signal is 4-20mA or an optional 0 to 10 volt interface. The isolated power supply eliminates any ground loop or electrical interface problems when multiple units are connected to the same controller. Low power consumption makes the CD-1300-ST suitable for battery-powered applications. Features include a bright 0.4" high LCD display for easy wide-angle readability. For direct control applications the relay can be configured to open or close above applications, the ductwork monitoring option is recommended.
Specifications
Parameter
Value
Operating Principle
Non-dispersive infrared (NDIR)
Gas Sampling method
Diffusion or available duct kit
Measurement range
0-2000 or 0-5000 ppm
Repeatability
± 20 ppm
Measurement accuracy
± 5% of reading or 75 ppm, whichever is greater
Warm up
Less than 1 minute
Power requirements
18-30 VDC or 18-28 VAC
Power consumption
Less than 1 watt
Operating temperature range
0-50° Celsius
Operating humidity range
5-95% RH, non-condensing
Voltage output (linear)
0-10 VDC full scale standard. Range field adjustable from 1-10 VDC
Current output (linear)
4-20 mA (Maximum loop resistance: 400 ohms)
LCD display
4 digit, 0.4" high
Alarm relay contact rating
3 amps @ 24 VDC
Case dimensions
5.25 x 3.25 x 1.4 inches (133 x 82 x 35 mm)
Enclosure material
Satin finish, high impact plastic
 

产品名称产品简介产品编号
CD-1300-ST二氧化碳传感器MR-01269-00



相关产品