CC28D可燃气体检测器
添加时间：2009-10-23 编辑：读取中…… 阅读：次
- 产品名称：CC28D可燃气体检测器
- 产品定货号：MR-00563-00
Fastest monitoring of flammable gases
Superior technology
Wherever flammable gases or vapours are found, the CC28 provides the best solution for safe monitoring. ATEX-certified design, built-in EX-certified horn and bright LED lights allow safe operation within highly flammable areas. The gas alarm is transmitted to the central control panel, simultaneously warning the control room and the worker in the danger area.
Fastest detection available
Using GfG’s unique sensor technology, coupled with a special "chimney-effect" the CC28 transmitter has the shortest response time in the market, detecting flammable gases using catalytic bead technology.When used in conjunction with our GMA controller series, a programmed delta alarm can shorten the response time still further. This gives an extra level of safety when handling explosive gas risks.
Smart sensor technology
Installation and sensor exchange are quick and easy using pre-calibrated smart, plug-in sensors. One-man calibration/ adjustment is possible directly at the transmitter, without opening the housing.
The advantages at a glance
World-wide shortest response time
Three choices – no display with display or with display and built-in audible and visual alarms
ATEX-Certification II 2G EEx dem [ib] IIC T4
EEC design inspection certificate BVS 04 ATEX E 132 X, functional test: BVS 05 ATEX G 001 X 0158
Ex-certified visual and loud acoustic alarm
Less wiring required
Simple sensor exchange using smart, plug-in sensors
Long sensor lifetime
Low maintenance costs
Status and function display directly on the transmitter
One-man calibration/ adjustment without opening casing
Operation possible in inaccessible places via remote control (option)
Remote control (option)
Some flammable gases are lighter than air (e.g. methane). If a transmitter is installed close to the ceiling, it can be connected by a fixed installed cable with a plug connection to the remote control. Thus, all adjustments can be made comfortably from floor level. With one remote control device, an unlimited number of transmitters can be controlled in this way.
Using transmitters without display, the remote control shows the current values on its’ own display. The display of the remote control mimics the transmitter display exactly. Inspection, maintenance and adjustment are therefore greatly simplified. Using the remote control inspection, service and calibration can be performed easily by one person.
Fastest monitoring of flammable gases
Superior technology
Wherever flammable gases or vapours are found, the CC28 provides the best solution for safe monitoring. ATEX-certified design, built-in EX-certified horn and bright LED lights allow safe operation within highly flammable areas. The gas alarm is transmitted to the central control panel, simultaneously warning the control room and the worker in the danger area.
Fastest detection available
Using GfG’s unique sensor technology, coupled with a special "chimney-effect" the CC28 transmitter has the shortest response time in the market, detecting flammable gases using catalytic bead technology.When used in conjunction with our GMA controller series, a programmed delta alarm can shorten the response time still further. This gives an extra level of safety when handling explosive gas risks.
Smart sensor technology
Installation and sensor exchange are quick and easy using pre-calibrated smart, plug-in sensors. One-man calibration/ adjustment is possible directly at the transmitter, without opening the housing.
The advantages at a glance
World-wide shortest response time
Three choices – no display with display or with display and built-in audible and visual alarms
ATEX-Certification II 2G EEx dem [ib] IIC T4
EEC design inspection certificate BVS 04 ATEX E 132 X, functional test: BVS 05 ATEX G 001 X 0158
Ex-certified visual and loud acoustic alarm
Less wiring required
Simple sensor exchange using smart, plug-in sensors
Long sensor lifetime
Low maintenance costs
Status and function display directly on the transmitter
One-man calibration/ adjustment without opening casing
Operation possible in inaccessible places via remote control (option)
Remote control (option)
Some flammable gases are lighter than air (e.g. methane). If a transmitter is installed close to the ceiling, it can be connected by a fixed installed cable with a plug connection to the remote control. Thus, all adjustments can be made comfortably from floor level. With one remote control device, an unlimited number of transmitters can be controlled in this way.
Using transmitters without display, the remote control shows the current values on its’ own display. The display of the remote control mimics the transmitter display exactly. Inspection, maintenance and adjustment are therefore greatly simplified. Using the remote control inspection, service and calibration can be performed easily by one person.
泰亚赛福 —— 世界领先的检测仪器集成供应商 
您当前的位置：
加入对比
