Detective+ Transportable Multi-Gas Area Monitor复合气体检测仪
添加时间：2009-10-20 编辑：C065 阅读：次
- 产品名称：Detective+ Transportable Multi-Gas Area Monitor复合气体检测仪
- 产品定货号：MR-00192-00
The Detective+ transportable area monitor is based on the highly successful Triple Plus+ and Detective models, building on the reputation, reliability and versatility of its forebears.
Detective+ is inherently rugged and robust, with a sturdy fixed or folding leg protective frame options. Loud and clear alarms can be transmitted between Detective+ units while an optional built in pump allows faster gas response and better sensor protection. Detective+ may now be equipped with infra-red sensor technology, which provides CO2 detection, allows higher flammable gas level monitoring and immunity to the poisoning effects which standard flammable gas sensors can suffer from.
There are now two options for battery capacity, either 36 hours or 60 hours with standard configuration, providing remote sites with extended usage in-between charges. Couple these features with the wide range of toxic gas sensors available and it makes Detective+ one of the most versatile area monitors available. 55,000 Detective and TriplePlus+ users can't be wrong.
- Up to 4 gases monitored in a rugged and sturdy protective frame
- Ultra-loud 104 dBA sounder and red LED cluster alarms
- Wide range of sensor options including infra-red
- Long 36 or 60 hour battery life
- Raised detectors, coupled with IP65 specification provides excellent sensor protection
- Built-in pump option to provide faster gas response
- 12 Detective+ units may be linked together, up to 100m from adjacent units
- Superb pedigree
- Detective+ is based on the highly successful Triple Plus+ multi-gas monitor which has sold over 55,000 units worldwide
- Versatile and user friendly
- Infra-red sensors available
- allows sampling of potentially high flammable gas levels and CO2
- infra-red sensors are unaffected by poisoning
- Built-in pump option provides fast response and extra sensor protection
- Display provides clear information, allows identification of gas hazard
- Easy tracking of multiple hazards
- Up to 60 hour battery operation
- Wide range of toxic gas sensors available
- Extremely loud and clear alarms
- Wailing omni-directional siren, 104 dBA @1 metre
- High intensity red LED clusters provide visual alarm indication
- All linked Detective+ units indicate an alarm sensed by any one unit
- Units actually sensing alarm have faster LED flash
- Audible and visible confidence blip
- Time weighted average alarms for 8 hours and 15 minutes averages
- Uniquely rugged, tripod construction
- Detectors are fully protected, even if device is overturned
- Raised detectors prevent water ingress
- Easy and quick to set up
- Folding or fixed leg options provide easy storage and transportation
Specification
Weight : 7.5 kg (19lb)
Dimensions : 640 h x 455 w x 455 d mm, (25.2 x 17.9 x 17.9 inches)
Ranges and Alarm Settings (Up to four gas measurement channels)
| Alarm |
Standard Range |
Typical Levels |
| Flammable Gas |
0 – 100% LEL |
20% LEL |
| Oxygen |
0 - 25% |
19% & 23% |
| Hydrogen sulphide |
0 - 50 ppm |
10 ppm |
| Carbon monoxide |
0 - 500 ppm |
35 ppm |
| Sulphur dioxide |
0 - 10 ppm |
2 ppm |
| Chlorine |
0 - 5 ppm |
0.5 ppm |
| Nitrogen dioxide |
0 - 10 ppm |
2 ppm |
| Phosphine |
0 - 5 ppm |
0.5 ppm |
| Ammonia |
0 - 50 ppm |
25 ppm |
| Ammonia |
0 - 1000 ppm |
N/A |
| Hydrogen (non-flammable levels) |
0 - 2000 ppm |
N/A |
| Hydrogen cyanide |
0 - 25 ppm |
10 ppm |
| Hydrogen chloride |
0 - 10 ppm |
5 ppm |
| Ozone |
0 - 1 ppm |
0.3 ppm |
| Chlorine Dioxide |
0 - 1 ppm |
0.1ppm |
| Hydrogen Fluoride |
0 - 10 ppm |
1pm |
| Ethylene Oxide |
0 - 10 ppm |
5ppm |
| Volatile Organic |
0 - 100 ppm |
N/A |
Infrared Sensors : Infrared sensors for flammable gas can be supplied as a single range, 0-100% LEL, utilising a single display channel, or as a dual range, 0-100% LEL/0- 100% volume, which then occupies two display channels. Infrared sensors for flammable gas can be supplied as a single range, 0-100% LEL, utilising a single display channel, or as a dual range, 0-100% LEL/0- 100% volume, which then occupies two display channels.
| Alarm |
Standard Range |
| Flammable Gas |
0-100% LEL |
20% LEL |
| Flammable Gas |
0-100% v/v |
None |
| Flammable Gas |
available for methane, propane, butane or ethylene |
| CO2 |
0-2.0% v/v 0.5/1.5% v/v |
Typical response times : Methane 20s, Oxygen 10s, typical toxic gas 20s,IR 30s
Expected sensor life : Flammable 5 years, Toxic 3 years, Oxygen 2 year minimum, IR >5 years
Audible alarms : Wailing, omni-directional siren, 104 dBA @ 1 metre.
Visible alarms : Three large, top-mounted red LED clusters and single red LED on control panel. In alarm mode LED clusters flash in quick succession LED clusters of linked Detectives repeating the alarm, flash more slowly than LED lights on those Detectives sensing the hazard. Slow flashing green LED indicates normal working. Rapid flashing green LED indicates low battery.
Display : High contrast LCD with back light 2 lines of 24 characters. Values and units for up to 4 gases displayed simultaneously at current, TWA or peak levels. Low battery, real time and elapsed time, calibration and configuration data also displayed.
Datalogging : Adjustable sample rate, 100 hours @ 1 minute sample rate (maximum 6000 data points per channel) Logging of events, user and site data
Menu : Operating menu allows access to setting up of instrument operation Log Menu allows selection of Users and Sites from predefined lists, marking the log file with an event, and start or stop of data logging Configuration Menu allows selection of display and alarm modes, setting of alarms, zero and calibration, and selection of flammable gas correction factors from predefined list.
Battery : 6 V, 7.2 Ah Sealed lead acid battery pack. Optional 6V, 12Ah high capacity pack
Battery life : Standard instrument: Up to 36 hours assuming flammable/CO2 sensor fitted with 7.2Ah battery. Up to 60 hours with optional 12Ah battery pack.
Battery charging : Built-in battery charging circuit, dual rate 100 – 120 VAC and 200 - 250 V AC Input options available. (Safe Area operation only) Typical charge time: 12 hours.
Operating Temperature range : -20癈 to +40癈 (-4癋 to 104癋)
Humidity : 0 - 95% RH non condensing
Approvals Europe : ATEX II 2G EEx ib d IIC T4, USA and Canada : Class 1 Division 1 Groups A, B, C, D (Pending)
Standards : EN50014, EN50020, 94/9/EC UL913 and CSA 22.2
Ingress protection : IP65
EMC : EN 50270
PC Interface : Detective+ has an in-built PC interface, which can be connected to the serial port of a computer using the optional RS232 lead. Portables PC software can be used to set alarms, clock, datalogging interval and password. Portables PC also controls datalogging, giving graphical display of instrument log file and allows file export to spreadsheet.
Calibration : Detective+ can be routinely calibrated quickly using its internal menu command, Portables PC or the Crowcon CheckBox IMH management system
Accessories : Baffle plate (to protect sensors), Interconnecting lead - 10 m standard, longer lengths up to 100m available, Computer lead - RS232 serial link, Portables PC software Aspirator Manual bulb and 2 m hose, both nonabsorbent and hydrocarbon resistant, Internal electric sampling pump option includes external water trap and 2m hose, longer lengths available on request.
Linked Detectives : Up to 12 units can be linked to provide perimeter or area monitoring
泰亚赛福 —— 世界领先的检测仪器集成供应商 
您当前的位置：
加入对比
